M6 X 100 , 1.5 D , wire tread insert

M6 X 100 , 1.5 D , wire tread insert

M6 X 100 , 1.5 D , wire tread insert

M6 X 100 , 1.5 D , wire tread insert

M6 X 100 , 1.5 D , wire tread insert

In Stock

€0.29

Tax included

M 8 X 125, D 1.5 threads for thread repair with VCOIL, HELICOIL, etc. Suitable for repairing, repairing, reinforcing a damaged, worn thread with easy and quick thread.

M 8 X125, D 1.5 for drilling hole 8.3, replacement height (closed) 8 mm
To create stable internal threads that are resistant to temperature and corrosion.
thread reinforcement in low shear materials
made of stainless steel of high quality

Χρειάζεσαι βοήθεια

Χρειάζεσαι βοήθεια;

Eίμαστε πάντα δίπλα σου
για να σου λύσουμε
οποιαδήποτε απορία.
Επικοινώνησε μαζί μας

210 2776 354

Product Details
Reviews (0)

Reference 408-8

No reviews

Customers who bought this product also bought:

Thread-locking ,Saratoga-frena filetti -324

Κολες-χημικα-λιπαντικα.

Thread-locking ,Saratoga-frena filetti -324

Toolsonline shop

Thread-locking ,Saratoga-frena filetti -324 Thread-locking fluid or threadlocker is a thin, single-component adhesive applied to the threads of fasteners such as screws and bolts to prevent loosening, leakage, and corrosion. Most thread-locking formulas are methacrylate-based and rely on the electrochemical activity of a metal substrate to cause...

Parting off and side tool holder 1/2"

Parting off and side tool holder 1/2" 2

In Stock

Μηχανουργικα

Parting off and side tool holder 1/2"

Parting off and side tool holder 1/2"

Thread-locking ,Saratoga-frena filetti -327

In Stock

Κολες-χημικα-λιπαντικα.

Thread-locking ,Saratoga-frena filetti -327

Toolsonline shop

Thread-locking ,Saratoga-frena filetti -327 Thread-locking fluid or threadlocker is a thin, single-component adhesive applied to the threads of fasteners such as screws and bolts to prevent loosening, leakage, and corrosion. Most thread-locking formulas are methacrylate-based and rely on the electrochemical activity of a metal substrate to cause...

90 ° angle and extra long tip design for narrow space

90 ° angle and extra long tip design for narrow space 2

In Stock

Pliers

90 ° angle and extra long tip design for narrow space

90 ° angle and extra long tip design for narrow space superb long nose circlip plier for reaching deep into cylinders and other hard to reach applications to extract the circlip can be used to remove and replace small to medium internal snap ring up to 56 mm deep

M 4 X 0.7 , 1.5 D , wire tread insert

M 4 X 0.7 , 1.5 D , wire tread insert 2

In Stock

Ανταλακτικά σπειρωμάτων

M 4 X 0.7 , 1.5 D , wire tread insert

M 4 X 0.7 , D 1.5 threads for thread repair with VCOIL, HELICOIL, etc. Suitable for repairing, repairing, reinforcing a damaged, worn thread with easy and quick thread. M 4 X0.7 D 1.5 for drilling hole 4.3, replacement height (closed) 4 mm To create stable internal threads that are resistant to temperature and corrosion. thread reinforcement in low shear...

Adjustable T-bar handle ratchet tap whrench, m 5 , m6 ,m7...

Adjustable T-bar handle ratchet tap whrench, m 5 , m6 ,m7... 2

In Stock

Μανέλες κολαούζων

Adjustable T-bar handle ratchet tap whrench, m 5 , m6 ,m7 , m8 ,m9 ,m10 ,m11 ,m12

Reversible ratchet tap holder wrench handle adjustable T - Handle tapping threading tool set fit for m5 ,m6 , m7 ,m8 ,m9 ,m10, m11 ,m12 .

7 mm hand reamer tool HSS

7 mm hand reamer tool HSS 2

In Stock

Reamer

7 mm hand reamer tool HSS

Reamer 7 mm suitable for making a hole with precision. overall length: 115 mm Cutting length: 68 mm tool frame: 5.5 mm din: 206 B weight: 0.02 kg A reamer is a type of rotary cutting tool used in metalworking. Precision reamers are designed to enlarge the size of a previously formed hole with a small amount but with a high degree of accuracy to leave...

Engine cylinder hone 50MM-178MM

Engine cylinder hone 50MM-178MM 2

In Stock

special tools for auto and moto.

Engine cylinder hone 50MM-178MM

48-9G0901 FORCE

Cylinder hones are an integral part of the tooling needed for engine reconditioning.Allows you to hone engine cylinder bores from 2" to 7" (50mm to 178mm). This hone has three replaceable 100mm long x 10mm wide stones and are fitted with a flexible drive shaft. A twist collar keeps the stones retracted for easy insertion into the cylinder reducing the...

11 mm black Hot - glue sticks

11 mm black Hot - glue sticks 2

In Stock

Κολες-χημικα-λιπαντικα.

11 mm black Hot - glue sticks

11 mm black Hot - glue sticks,these all purpose hot melt glue sticks dry black and can be used in either high ,low or dual tempereture glue guns.They are perfect for paper ,cardboard,wood,and even bonding componants to crossover boards,it works well on most porous and non-porous materials. color : black stick diameter :11 mm stick lenght...

Hand cleaning paste ,Saratoga

Hand cleaning paste ,Saratoga 2

In Stock

Κολες-χημικα-λιπαντικα.

Hand cleaning paste ,Saratoga

Hand cleaning paste instantly eliminates all traces of dirtiness from the skin ,petroleum,tar,grease, oil,rustpaint,ink,graphite e.t.c.With its natural plant-based proteins derived from wheat germ and glycerine.

6 other products in the same category:

M 10 X 100 , 1.5 D , wire tread insert

M 10 X 100 , 1.5 D , wire tread insert 2

In Stock

Ανταλακτικά σπειρωμάτων

M 10 X 100 , 1.5 D , wire tread insert

M 10 X 100, D 1.5 threads for thread repair with VCOIL, HELICOIL, etc. Suitable for repairing, repairing, reinforcing a damaged, worn thread with easy and quick thread. M 10 X100, D 1.5 for drilling hole 10.3, replacement height (closed) 10 mm To create stable internal threads that are resistant to temperature and corrosion. thread reinforcement in low...

M 4 X 0.7 , 1.5 D , wire tread insert

M 4 X 0.7 , 1.5 D , wire tread insert 2

In Stock

Ανταλακτικά σπειρωμάτων

M 4 X 0.7 , 1.5 D , wire tread insert

M 4 X 0.7 , D 1.5 threads for thread repair with VCOIL, HELICOIL, etc. Suitable for repairing, repairing, reinforcing a damaged, worn thread with easy and quick thread. M 4 X0.7 D 1.5 for drilling hole 4.3, replacement height (closed) 4 mm To create stable internal threads that are resistant to temperature and corrosion. thread reinforcement in low shear...

M6 X 100 1,5 D wire tread insert

M6 X 100 1,5 D wire tread insert 2

In Stock

Ανταλακτικά σπειρωμάτων

M6 X 100 1,5 D wire tread insert

M6 X 100 1,5 D wire tread insert

M 10 X 150 , 1.5 D , wire tread insert

M 10 X 150 , 1.5 D , wire tread insert 2

In Stock

Ανταλακτικά σπειρωμάτων

M 10 X 150 , 1.5 D , wire tread insert

M 10 X 150, D 1.5 threads for thread repair with VCOIL, HELICOIL, etc. Suitable for repairing, repairing, reinforcing a damaged, worn thread with easy and quick thread. M 10 X150, D 1.5 for drilling hole 10.3, replacement height (closed) 8 mm To create stable internal threads that are resistant to temperature and corrosion. thread reinforcement in low...

M 5 X 0.8 , 1.5 D , wire tread insert

M 5 X 0.8 , 1.5 D , wire tread insert 2

In Stock

Ανταλακτικά σπειρωμάτων

M 5 X 0.8 , 1.5 D , wire tread insert

M 5 X 0.8 , D 1.5 threads for thread repair with VCOIL, HELICOIL, etc. Suitable for repairing, repairing, reinforcing a damaged, worn thread with easy and quick thread. M 5 X0.8 D 1.5 for drilling hole 5.3, replacement height (closed) 5 mm To create stable internal threads that are resistant to temperature and corrosion. thread reinforcement in low shear...

M 10 X 125 , 1.5 D , wire tread insert

M 10 X 125 , 1.5 D , wire tread insert 2

In Stock

Ανταλακτικά σπειρωμάτων

M 10 X 125 , 1.5 D , wire tread insert

M 10 X 125, D 1.5 threads for thread repair with VCOIL, HELICOIL, etc. Suitable for repairing, repairing, reinforcing a damaged, worn thread with easy and quick thread. M 10 X125, D 1.5 for drilling hole 10.3, replacement height (closed) 8 mm To create stable internal threads that are resistant to temperature and corrosion. thread reinforcement in low...

Product added to wishlist

Product added to compare.

To better serve our users we use Cookies. By choosing to continue consented to using Cookies.