List of products by brand ASTA TOOLS

ASTA TOOLS

Less

Showing 1-24 of 26 item(s)

In Stock

Oil change tools,oil filter tools

Oil drain tray,16 lt

1415-Α-9004Β

€14.00

Oill drain tray, 16 lt ,Made of durable polyethylene, high resistance to acids, alkalis and chemicals, very durable Diameter 450 mm, height 168 mm, weight 1.060 g, 16 liter capacitysafe and clean pouring over pouring faucet, with handles resistant to most solvents (temperature less than 60 ° C), acids, alkalis, alcohol and oil material PE 8lt dish to...

In Stock

Εργαλεία τροχών,μετάδοσης,ανάρτησης

ball joint separator 400 mm 16"

1416-A-F0416

€12.00

Ball joint separator 400 mm ,16",to remove ball joints from spindle support arms without damaging other componets,so you know it will do the job right. It can be usedon wide variety of vehicles from compact cars to light-duty trucks .It's 400 mm long for the reach you need and has a 18 mm fork spread length 400 mm opening 18 mm

In Stock

Δίποδοι εξολκείς

2 arm puller bearing

1371-A-A2455

€28.00

2 Arm pullers, armature bearing pullers made of high-quality hardened steel with lock arms. Suitable for removing small bearings in alternators and pull arm windshield wipers. heavy duty 2 arm puller for garage and industrial use. The special claw legs are reversible for internal and external pulling. The extended adjustment of the puller allows to fix...

In Stock

Car clips

11PC handly remover set

1370-A-PRS11

€15.00

11pc trim upholstery panel, clips, fasteners removal set for us on internal and external works. Made of composite resilient nylon to minimize panel damage or scratches. Supplied in a handy rolled up storage wallet. For plastic upholstery fastener. Place tool under edge of door panel and insert into fastener as far as possible and then simply pull up. Set...

In Stock

Εργαλεία καυσίμων

6PCS Professional extra long swivel glow and spark plug socket set

1368-A-36L

€58.00

6pc professional extra long swivel glow and spark plug socket set to use with 3/8″ drive ratchet for removal and installation of single hex plugs from tight or hard to reach areas. Feature universal joint and specially designed to grip plug being extracted. Overall length of 150mm. Made of hardened and tempered Chrome Vanadium (Cr-V) steel with matt...

Injector Extraction kit , Ford 2.0l diesel Ecoblue

Injector Extraction kit , Ford 2.0l diesel Ecoblue 2

In Stock

Εργαλεία καυσίμων

Injector Extraction kit , Ford 2.0l diesel Ecoblue

1409-A-IE1033

€80.00

Injector Extraction kit , Ford 2.0l diesel Ecoblue Injector extraction kit This has been designed to extract seized injectors from the Ford 2.0L Diesel EcoBlue engines in the method described by Ford. Injector removal is required for any service or repair work that requires the removal of the cam cover, cylinder head or cam shafts. NOTE: This method is...

SUMP PLUG SOCKET REMOVAL TOOL VAG VW 2 LITER 4 CYLINDER ¼” DRIVE

SUMP PLUG SOCKET REMOVAL TOOL VAG VW 2 LITER 4 CYLINDER ¼” DRIVE 2

In Stock

ergalia xronismoy giab

Sump plug socket removal tool VAG, VW, SEAT, SKODA, AUDI 2 LT, 4 CYLINDER

1372-A-H10CW

€8.12

Sump plug socket removal tool VAG, VW, SEAT, SKODA, AUDI 2 LT, 4 CYLINDER Sump plug socket with ¼” drive – easy to use it with a ¼” hand-ratchet or 12mm wrench. The specially designed socket is used to remove the sump plug on VAG 2.0 4 cylinder TDI GEN III engines - Golf Mk VII, Audi, Seat Leon 2013 APPLICATION: • Audi A1,A3, A4, A5/S5, A6/Avant, A6/S6,...

In Stock

Εργαλεία τροχών,μετάδοσης,ανάρτησης

Ball joint separator

1369-AH-1727

€28.00

Ball joint separator , this universal tie rod end remover will work on most cars and light trucks. The necessary force needed to remove tie rod end is easily applied through the cender pivot action. fork opening 20 mm reach 20 mm - 50 mm suitable for VW, AUDI, BMW, FIAT, FORD, MERCEDES, NISSAN, OPEL, PEUGEOT, RENAULT, ROVER, SAAB, TOYOTA, VOLVO ASTA TOOLS

In Stock

Εργαλεία τροχών,μετάδοσης,ανάρτησης

Universal CV - joint puller

1375-A037A

€32.00

Universal CV - joint puller ,quickly removes the CV-joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip. Reduces risk of damage to transmission.Savew on labor time and suitable for most vehicles.

In Stock

Tools for cars engine valve

Valve Spring Compressor 55 - 175 mm

1376-Α-1731

€32.00

Valve spring compressor, specially designed for difficult access and deep-seated multi-valve cylinder heads.Fully adjustable valve spring compressor for use on large petrol and diesel engines. A unique ‘direct action’ compressor lever gives improved visibility and ease of use in areas of difficult access. Manufactured from heavy duty steel with all...

In Stock

Tools for cars engine valve

extra long valve stem seal ring pliers

A-936

€9.50

extra long valve stem seal ring pliers. for removing valve stem seals in multi-valve engines. jaw longitudinal-toothed avoiding slipping down. for deeply levelled valve stem seals.

In Stock

special tools for auto and moto.

Hose pinching pliers set 3pc

1381-AH-EF2903

€10.00

3pcs Flexible Nylon Hose Clamp Mixed Sizes Filling Hose Tool Kit Pinching Off Pliers For clamping flexible hoses. Made of heat-resistant reinforced nylon, each includes a locking mechanism. One small clamp for 1/8 "to 5/16" diameter. One medium clamp for 1/2 "to 3/4" diameter. One larger size clamp for 3/4 "to 1" diameter.

In Stock

special tools for auto and moto.

multi-purpose inner tie rod tool

1379-A-12TRT

€29.00

This special tool should easily allow you to replace inner tie rod ends without removing the rack and pinion or other components. Also features a 33mm-42mm capacity and solid steel construction

overhead valve spring compressor, ASTA A-266B

overhead valve spring compressor, ASTA A-266B 2

In Stock

Tools for cars engine valve

overhead valve spring compressor

1328-A-266B

€23.00

For use on a wide range of OHV, OHC and CVH engines but not suitable for use on engines with deep seated valves. Allows valve springs and valve stem oil seals to be replaced with the cylinder head. Features a reversible Jaw-adaptor and an automatic cam-action locking to a pre-determind setting.

In Stock

special tools for auto and moto.

Brake Caliper Wind Back Tool Set 22 pcs ,ASTA TOOLS A-FL2202

1373-Α-FL2202

€29.00

Brake Caliper Wind Back Tool Set 22 pcs ,ASTA TOOLS A-FL2202 Suitable for push back and wind back brake pistons, offers an efficient operation with both right and / or left helix bolt. Applications: Alfa Romeo, Audi, BMW, Citroën, Fiat, Ford, Honda, Jaguar, Mazda, Mercedes Benz, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Subaru, Toyota,...

Car clips

4pc composite scraper set

504-A-4SCR

€15.00

Set of 4-piece car scrapers, removable markers, decorative, stickers, aluminum wheel counterweights, flanges, silicones, adhesives, dirt and many other uses. set of 4 pieces, 19 mm wide (3/4 "), 22 mm (7/8"), 25mm (1 "), 38mm (1-1 / 2") and 270 mm long and all 4 sharpeners. multipurpose Comfortable handle. Designed to protect the hand and absorb hammer...

In Stock

Εργαλεία γενικής χρήσεως

TDC position indicator for DTI Gauge

1345-A-TP93

€12.00

TDC ( Top Dead Centre ) positioning tool for Alfa Romeo, Fiat, Lancia ,VAG and other engines , adapter that allows to fix a measurement gauge to be fixed at one end the other end is fixed into the spark plug hole for indication of the exact TDC position. used on most 2-4 stroke engines Works on spark plug thread M14 x 125 mm ENGINES •161.02, 324.01,...

In Stock

Tools for cars engine valve

Valve spring compressor set

1350-A-EVS3

€36.00

Engine valve spring compressor set for removal and replacement of valve springs and valve stem oil seals in-situ without the need to remove the cylinder head. Suitable for use on a wide range of most modern multi-valve overhead camshaft (OHC), single overhead camshaft (SOHC) and double overhead camshaft (DOHC) engines. Set includes adjustable upright...

In Stock

Βοηθητικά εργαλεία μηχανικών

10 PC Wheel bearings race and seal driver set size range 40-81mm

1344-A-260A

€39.00

Mounting Kit for Bearings and Sealants. Wheel bearings race and seal driver set size range 40-81mm. The set is used for equiaxial mounting of bearings, rings, sealants, sleeves and rolling shafts. Can be used for most cars. Set contains: 1 x Pin length 145mm Ø 14mm 9 adapters in sizes: 40, 44, 50, 59, 62, 65, 72, 76, 81mm inside diameter plate hole: Ø...

In Stock

Εργαλεία χρονισμού για κινητήρες BMW

Cranksaft turning & holding kit for BMW, MINI, 1.2, 1.5, 2.0

1343-A-BCT

€43.00

In Stock

Workshop equipment

24 led workshop lamp

1342-A-24SMD/C

€16.00

24 led workshop lamp , INSPECTION LAMP WORK LIGHT LOFT CAR GARAGE 5 METER Hangable work light ideal for lighting areas such as lofts, garages, car maintenance and allother areas where portable light is required. This hangable work light comes complete with a protective cage around the light bulb ensuring safe use. Comes complete with on / off switch and...

In Stock

Oil change tools,oil filter tools

Oil filter wrench for Toyota & Lexus , 64,5-14, ASTA A-CUPTO

1329-A-CUPTO

€11.00

Oil filter wrench 64,5 mm 14 flutes for Toyota & Lexus 1.8L & 2.0 L 4 Cylinder Engines , 3/8 drive or 24 mm wrenches removes filters without damage to the filter housing TOYOTA Corolla, Prius, Allion , Auris, Corolla Axio, Corolla Fielder , Corolla rumion , Isis, Ist, Nooh, Premio, Premio, Prius, Voxy, Wish, Matrix, RAV4, Yaris, LEXUS...

Socket tool for oxygen sensor 22 mm , 1/2 dr

Socket tool for oxygen sensor 22 mm , 1/2 dr 2

In Stock

Εργαλεία αισθητήρα λάμδα

Socket tool for oxygen sensor 22 mm , 1/2 dr

1325-A-308

€9.00

A tool suitable for the assembly and disassembly of the oxygen sensor, 22mm, is fitted with all tools with a 1/2 socket. for ratchet or jaw clamp or tool with 1/2 slot for 22mm lambda sensor for the assembly and disassembly of the oxygen sensor. with slot on the side for convenient use without crashing the cable and causing damage fits most oxygen lambda...

Ratchets 1/2

1/2" 600 mm swivel head breaker bar

1297-600

€19.80

Split handle 1/2 very long, suitable for difficult situations, where nuts, screws, bolts, etc. are tightened and blocked. High strength for strong clamps. 1/2 frame suitable for mounting nuts, extensions, adapters, etc. 180 ° rotary head allows easy and fast operation even when there are obstacles. Length 600 mm high-strength Chrome vanadium handle. And...