e

Δίποδοι εξολκείς

Τρίποδοι εξολκείς

Αποκολλητές ρουλεμάν

Εξωλκείς τυφλών ρουλεμάν

Showing 1-20 of 20 item(s)

Industrial Supplies

Two sets bearing seperator kit

138-66610

€88.00

Two sets bearing seperator kit and bolts. Capacity:30MM-50MM Capacity:50MM-75MM 4PC main/extension rod 17mm x127mm 4PC main/extension rod 14mm x102mm 1pc beam 1pc forcing screw packing plow mold case

In Stock

Screw extractor set 5pc

542-63005

€5.90

Set of 5 screw extractors for removing sheared off screws and bolts m3 - m18.Simple drill a pilot hole in the broken screw in the left hand threaded extractor until bolt turns screw extractor 2.7 mm for screw Μ 3 - Μ 6 ή 1/8" - 1/4" screw extractor 3.4 mm for screw Μ 6 - Μ 8 ή 1/4" - 5/16" screw extractor 4 mm for screw Μ 8 - Μ 11 ή 5/16"-7/16"...

Industrial Supplies

Bearing separator 30-50mm

139-666050

€16.00

Bearing seperator ,Manufactured from drop-forged, hardened alloy steel. These industrial quality bearing separators are designed for removing bearings where there is access behind the bearings.Capacity 30-50mm,bolt 9.5mmx125mmL.Hole 8.2mmx3/8"x16t

In Stock

Industrial Supplies

Three jaws gear puller 8"-200mm

184-8-200

€24.80

Three jaws gear puller 8"-200mm Tripod detachable, reliable model for quick removal of bearings, wheels, pulleys, gears, general purpose, etc. The extractor legs are bi-directional, reversible, for internal and external extrusion. CHARACTERISTICS: Three reversible legs. screw 18mm thick, 200mm long leg opening from 85mm to 200mm Height inside 180mm...

In Stock

Εξωλκείς τυφλών ρουλεμάν

Inner bearing puller 18 mm - 23 mm

953-910Τ1-R1823

€19.02

Inner bearing puller 18 mm - 23 mm

In Stock

Αποκολλητές ρουλεμάν

Slide hammer puller 230 mm , GEDORE 1.35/1

940-1351

€29.82

Slide hammer puller 230 mm , suited for the removal of small ball bearings since there is often not enough room for counter-support braces. Can also be used with threaded inserts. length 270 mm connecting thread m10 impact weight 700 g length sliding surface 200 mm

In Stock

Εξωλκείς τυφλών ρουλεμάν

Inner bearing puller 12 mm - 17 mm

932-910Τ1-R1217

€16.80

Inner bearing puller 12 mm - 17 mm

In Stock

Εξωλκείς τυφλών ρουλεμάν

Inner bearing puller 8 mm - 11 mm

928-910Τ1-R0811

€16.80

Inner bearing puller 8 mm - 11 mm

In Stock

Εξολκείς αυτοκινήτων-μοτοσυκλετών

Harmonic balancer puller set

878-2

€52.00

Harmonic balancer puller set, removes balancers, pulleys and gears with tapped holes. Floating swivel prevents damage to shaft end.Four slots in yoke for two or three hole application.Bolt tool to balancer with center screw on end of crank shaft.Tighten while tapping on end of screw head to remove balancer.

In Stock

Industrial Supplies

Thick jaws gear puller force

65910 FORCE

€22.70

Thick jaws gear puller force.Depth 100mm.Bearing dimension 40-90mm.

In Stock

Industrial Supplies

Bearing puller kit

133-66618

€40.40

For the removal of shaft mounted ball bearings within a housing, self locking hooks lock onto the ball bearing. The self locking arrangement means that the force applied is 100% utilised to give a straight pulling force at all times. Puller yoke with centre screw and twin arms. 2 x Threaded leg extensions 30 and 95 mm. 6 x Ball ended threaded puller...

In Stock

Τρίποδοι εξολκείς

3 jaws gear puller 3" -75 mm

409-75

€7.50

3 jaw puller 3" - 75 mm, reliable model for quick removal of bearings, wheels, pulleys, gears, general purpose, etc. The extractor legs are bi-directional, reversible, for internal and external extrusion. CHARACTERISTICS: Three reversible legs. screw 10mm thick, 95 mm long leg opening 40 mm to 75 mm Height inside 70mm Hexagon bolt for tightening with...

In Stock

Τρίποδοι εξολκείς

3 jaws gear puller 4" -100 mm

414-100

€9.00

3 jaw puller 4" - 100 mm, reliable model for quick removal of bearings, wheels, pulleys, gears, general purpose, etc. The extractor legs are bi-directional, reversible, for internal and external extrusion. CHARACTERISTICS: Three reversible legs. screw 13.5mm thick, 130 mm long leg opening 50 mm to 100 mm Height inside 90mm Hexagon bolt for tightening...

In Stock

Εργαλεία τροχών,μετάδοσης,ανάρτησης

Ball joint separator 300 mm 12"

662-628300

€12.50

Ball joint separator 300 mm 12",to remove ball joints from spindle support arms without damaging other componets,so you know it will do the job right.It can be usedon wide variety of vehicles from compact cars to light-duty trucks .It's 300 mm long for the reach you need and has a 24mm fork spread length 300 mm opening 24 mm

In Stock

Industrial Supplies

3 jaws gear puller 6"- 150 mm

199-6-150

€10.20

3 jaws gear puller 6" - 150 mm , reliable model for quick removal of bearings, wheels, pulleys, gears, general purpose, etc. The extractor legs are bi-directional, reversible, for internal and external extrusion. CHARACTERISTICS: Three reversible legs. screw 15mm thick, 160mm long leg opening 60mm to 150mm Internal height (payload) 130mm Hexagon bolt...

Εξολκείς αυτοκινήτων-μοτοσυκλετών

Puller for ribbed drive pulleys

468-902G27

€39.50

Puller for ribbed drive pulleys for easy pulley removal even at hard-to-reach points. This tool is suitable for crankshafts, dynamos, air conditioning units, water pump. it helps to remove the grooved pulley adjustable braces from 45 mm to 165 mm, adjustable easily and firmly with 10 mm allen key (included) the extractor is operated with 3/8 ratchets,...

Εργαλεία τροχών,μετάδοσης,ανάρτησης

ball joint separator 400 mm 16"

663-628400

€12.70

Ball joint separator 400 mm ,16",to remove ball joints from spindle support arms without damaging other componets,so you know it will do the job right.It can be usedon wide variety of vehicles from compact cars to light-duty trucks .It's 400 mm long for the reach you need and has a 17mm fork spread length 400 mm opening 17 mm

In Stock

Δίποδοι εξολκείς

75 mm -3",two jaws puller for bearings,wheels,pulleys,sprockets,general purpose ...

449-75

€6.20

3 "- 75 mm ,two jaws puller, reliable model for quick removal of bearings, wheels, pulleys, sprockets, general purpose, etc. The extractor legs are reciprocable, reversible, for internal and external extrusion. CHARACTERISTICS: Two reversible legs. screw 13.5mm thick, 130mm long 75 mm leg opening Height inside (effective) 102 mm Hexagon bolt for...

Industrial Supplies

Bearing seperator 50 -75 MM

156-666075

€21.00

Industrial Supplies

Bearing separator 75-105mm

157-666105

€31.00