Εξολκείς αυτοκινήτων-μοτοσυκλετών

In Stock

Εργαλεία τροχών,μετάδοσης,ανάρτησης

Universal CV - joint puller

€42.50

Universal CV - joint puller ,quickly removes the CV-joint from the drive shaft whithout damaging the joint,and keeps hands free for releasing retaining circlip.Reduces risk of damage to transmission.Savew on labor time and suitable for most vehicles.

In Stock

Industrial Supplies

Bearing separator 30-50mm

139-666050

€16.00

Bearing seperator ,Manufactured from drop-forged, hardened alloy steel. These industrial quality bearing separators are designed for removing bearings where there is access behind the bearings.Capacity 30-50mm,bolt 9.5mmx125mmL.Hole 8.2mmx3/8"x16t

In Stock

Βοηθητικά εργαλεία μηχανικών

4pc pry bar set

689-904U5

€17.30

4pc pry bar set,heavy duty ,ideally suited for and breakdowown and installation work ,testing of defective bearings etc. content: pry bar 200 mm - 8' , 45° pry bar 300 mm - 12' , 45° pry bar 450 mm - 18' , 45° pry bar 600 mm - 24' , 45°

In Stock

special tools for auto and moto.

Coil spring compressor

118-f200

€28.50

2 NEW HEAVY DUTY STRUT SPRING COMPRESSOR SET 2 PC. STRUT AND COIL SPRING COMPRESSOR IDEAL FOR REMOVAL AND INSTALLATION OF AUTO AND TRUCK COIL SPRING AND STRUTS. STRONG STEEL JAWS SECURELY HOOKS INTO COILS USE ON OR OFF THE CAR HEAT TREATED SCREW

In Stock

Εργαλεία τροχών,μετάδοσης,ανάρτησης

ball joint separator 400 mm 16"

663-628400

€12.70

Ball joint separator 400 mm ,16",to remove ball joints from spindle support arms without damaging other componets,so you know it will do the job right.It can be usedon wide variety of vehicles from compact cars to light-duty trucks .It's 400 mm long for the reach you need and has a 17mm fork spread length 400 mm opening 17 mm

In Stock

Εργαλεία καυσίμων

Fuel Tank Sender Wrench 3 Leg 75 - 160mm

f102

€18.70

This 3 leg Fuel Tank Sender Wrench is designed for the removal of the retaining ring on the fuel tank sender units. The size ranges from 75mm to 160mm which will cover many makes and models Additional Information 3 Leg The size ranges from 75mm to 160mm Designed for removal of the retaining ring on the fuel tank sender units Suitable for many modern makes...

In Stock

Industrial Supplies

Bearing puller kit

133-66618

€40.40

For the removal of shaft mounted ball bearings within a housing, self locking hooks lock onto the ball bearing. The self locking arrangement means that the force applied is 100% utilised to give a straight pulling force at all times. Puller yoke with centre screw and twin arms. 2 x Threaded leg extensions 30 and 95 mm. 6 x Ball ended threaded puller...

In Stock

Motorcycle tools

Motorcycle flywheel drive puller set 10pcs

274-H0-7013

€64.00

Motorcycle flywheel drive puller set 10pcs, application: HONDA ,SUZUKI,YAMAHA,KYMCO,DUCATi,CAGIVA,BOSCH,GILERA,SAM,DUCAN, SFERA,MBK,PEUGEOT,KIMOO,MOTOPLATT,KAWASAKI,KOKUSAN,MINARELI Thread sizes: M14X1.5 right Μ16Χ1.5 right Μ18Χ1.5 right Μ19Χ1.0 right Μ20Χ1.0 right Μ22Χ1.0 right Μ22Χ1.5 right Μ24Χ1.0 right Μ25Χ1.5 right Μ26Χ1.0 right Μ26Χ1.5 right...

Εξαρτήματα Εργαλείων

Speedout set

SPEED OUT

€6.99

The SpeedOut screw-damaged screwdriver set includes 4 pulleys to meet all your needs and a different screw type and difficulty! They are made of steel and you will receive them in a practical case for your toolbox. SpeedOut Damaged Screw Cutter Set a tool that should not be missing from any toolbox

In Stock

Industrial Supplies

3 jaws gear puller 6"- 150 mm

199-6-150

€10.20

3 jaws gear puller 6" - 150 mm , reliable model for quick removal of bearings, wheels, pulleys, gears, general purpose, etc. The extractor legs are bi-directional, reversible, for internal and external extrusion. CHARACTERISTICS: Three reversible legs. screw 15mm thick, 160mm long leg opening 60mm to 150mm Internal height (payload) 130mm Hexagon bolt...

In Stock

special tools for auto and moto.

Coil spring compressor 370mm

263-370

€34.00

Set of 2 spring pressure regulator compressors. Heat treated steel jaws and leaded screws (370mm) ensure you obtain professional job performance. This tool set is designed for use in limited space under the wheel arch to safely remove coil springs. The jaws design is fitting to wrap coil claws for safety. Maximum jaw opening is 370 mm. The jaws are made...

In Stock

special tools for auto and moto.

Stud extractor set 4pc

132-5042

€22.00

Stud extractor set 4pc for remove treaded,broken,rusted stripped or smooth studs.4pc stud extractor 6MM,8MM,10MM,12MM

In Stock

Industrial Supplies

Thick jaws gear puller force

65910 FORCE

€22.70

Thick jaws gear puller force.Depth 100mm.Bearing dimension 40-90mm.

Screw extractor set 5pc

542-63005

€5.90

Set of 5 screw extractors for removing sheared off screws and bolts m3 - m18.Simple drill a pilot hole in the broken screw in the left hand threaded extractor until bolt turns screw extractor 2.7 mm for screw Μ 3 - Μ 6 ή 1/8" - 1/4" screw extractor 3.4 mm for screw Μ 6 - Μ 8 ή 1/4" - 5/16" screw extractor 4 mm for screw Μ 8 - Μ 11 ή 5/16"-7/16"...

In Stock

Engine timing tools

Belt installing tool set 3pc

309-903G20

€22.00

Belt installing tool set 3pc,specially designed set of tools for installing the new belt onto the pulley. applicable: ALFA ROMEO,BMW,CITROEN,CHRYSLER,DACIA,FIAT,FORD,MAZDA,OPEL,PEUGEOT,RENAULT,SEAT,SKODA,SMART,VW,VOLVO κ.α

special tools for auto and moto.

multi-purpose inner tie rod tool

92-f350445

€37.50

This special tool should easily allow you to replace inner tie rod ends without removing the rack and pinion or other components. Also features a 33mm-42mm capacity and solid steel construction

Εξολκείς αυτοκινήτων-μοτοσυκλετών

Puller for ribbed drive pulleys

468-902G27

€39.50

Puller for ribbed drive pulleys for easy pulley removal even at hard-to-reach points. This tool is suitable for crankshafts, dynamos, air conditioning units, water pump. it helps to remove the grooved pulley adjustable braces from 45 mm to 165 mm, adjustable easily and firmly with 10 mm allen key (included) the extractor is operated with 3/8 ratchets,...

Workshop equipment

62802 Ball Joint Separator 20mm

62802

€16.48

Force 62802 features: Separator for track-rod ends, anti-roll bar mountings, ball joints etc Jaw opening: 20mm Force 62802 features: Separator for track-rod ends, anti-roll bar mountings, ball joints etc Jaw opening: 20mm

In Stock

Δίποδοι εξολκείς

75 mm -3",two jaws puller for bearings,wheels,pulleys,sprockets,general purpose ...

449-75

€6.20

3 "- 75 mm ,two jaws puller, reliable model for quick removal of bearings, wheels, pulleys, sprockets, general purpose, etc. The extractor legs are reciprocable, reversible, for internal and external extrusion. CHARACTERISTICS: Two reversible legs. screw 13.5mm thick, 130mm long 75 mm leg opening Height inside (effective) 102 mm Hexagon bolt for...

Τρίποδοι εξολκείς

3 jaws gear puller 4" -100 mm

414-100

€9.00

3 jaw puller 4" - 100 mm, reliable model for quick removal of bearings, wheels, pulleys, gears, general purpose, etc. The extractor legs are bi-directional, reversible, for internal and external extrusion. CHARACTERISTICS: Three reversible legs. screw 13.5mm thick, 130 mm long leg opening 50 mm to 100 mm Height inside 90mm Hexagon bolt for tightening...

Τρίποδοι εξολκείς

3 jaws gear puller 3" -75 mm

409-75

€7.50

3 jaw puller 3" - 75 mm, reliable model for quick removal of bearings, wheels, pulleys, gears, general purpose, etc. The extractor legs are bi-directional, reversible, for internal and external extrusion. CHARACTERISTICS: Three reversible legs. screw 10mm thick, 95 mm long leg opening 40 mm to 75 mm Height inside 70mm Hexagon bolt for tightening with...

Industrial Supplies

Three jaws gear puller 8"-200mm

184-8-200

€19.80

Three jaws gear puller 8"-200mm Tripod detachable, reliable model for quick removal of bearings, wheels, pulleys, gears, general purpose, etc. The extractor legs are bi-directional, reversible, for internal and external extrusion. CHARACTERISTICS: Three reversible legs. screw 18mm thick, 200mm long leg opening from 85mm to 200mm Height inside 180mm...

Industrial Supplies

Two sets bearing seperator kit

138-66610

€83.00

Two sets bearing seperator kit and bolts. Capacity:30MM-50MM Capacity:50MM-75MM 4PC main/extension rod 17mm x127mm 4PC main/extension rod 14mm x102mm 1pc beam 1pc forcing screw packing plow mold case

Industrial Supplies

Bearing seperator 50 -75 MM

156-666075

€21.00

Showing 1-24 of 25 item(s)