Ball joint separator ,force tools 62805

Ball joint separator ,force tools 62805

Ball joint separator ,force tools 62805

Ball joint separator ,force tools 62805

Ball joint separator ,force tools 62805

In Stock

€35.45

Tax included

Ball joint separator , this universal tie rod end remover will work on most cars and light trucks. The necessary force needed to remove tie rod end is easily applied through the cender pivot action.

fork opening 20 mm
reach 20 mm - 50 mm
suitable for VW, AUDI, BMW, FIAT, FORD, MERCEDES, NISSAN, OPEL, PEUGEOT, RENAULT, ROVER, SAAB, TOYOTA, VOLVO
FORCE TOOLS

Χρειάζεσαι βοήθεια

Χρειάζεσαι βοήθεια;

Eίμαστε πάντα δίπλα σου
για να σου λύσουμε
οποιαδήποτε απορία.
Επικοινώνησε μαζί μας

210 2776 354

Product Details
Reviews (0)

Reference 1150-62805

No reviews

Customers who bought this product also bought:

Coil spring compressor 370mm

Coil spring compressor 370mm 2

In Stock

special tools for auto and moto.

Coil spring compressor 370mm

Set of 2 spring pressure regulator compressors. Heat treated steel jaws and leaded screws (370mm) ensure you obtain professional job performance. This tool set is designed for use in limited space under the wheel arch to safely remove coil springs. The jaws design is fitting to wrap coil claws for safety. Maximum jaw opening is 370 mm. The jaws are made...

ball joint separator 400 mm 16"

ball joint separator 400 mm 16" 2

In Stock

Εργαλεία τροχών,μετάδοσης,ανάρτησης

ball joint separator 400 mm 16"

Ball joint separator 400 mm ,16",to remove ball joints from spindle support arms without damaging other componets,so you know it will do the job right.It can be usedon wide variety of vehicles from compact cars to light-duty trucks .It's 400 mm long for the reach you need and has a 17mm fork spread length 400 mm opening 17 mm

Digital inflator gun

Digital inflator gun 2

In Stock

Εργαλεία τροχών,μετάδοσης,ανάρτησης

Digital inflator gun

Digital inflator gun use for most vehicles, such as car, suv, truck, motorcycle,bisycle e.t.c measurement units PSI,BAR, KPA, KG/CM2 andiskid handle is more comfortable clear dial,accurate reading , with backlit LCD display, to meet your pressure measurement needs throughout the day infatable handle bleed button metal chuck , easy to lock more accurately...

36 pce number & letter punch set , 5 mm stamps

36 pce number & letter punch set , 5 mm stamps 2

In Stock

Χτυπητοί αριθμοί γράμματα

36 pce number & letter punch set , 5 mm stamps

36 pce number & letter punch set, 5 mm stamps contains 5mm stamps A-Z letters and 0-9 numbers letters A-B-C-D-E-F-G-H-I-J-K-L-M-N-O-P-Q-R-S-T-U-V-W-X-Y-Z-& number 0-1-2-3-4-5-6-7-8-9, 6 and 9 use the same stamp hardened and tempered in plastic storage box

Ball joint separator 300 mm 12"

Ball joint separator 300 mm 12" 2

In Stock

Εργαλεία τροχών,μετάδοσης,ανάρτησης

Ball joint separator 300 mm 12"

Ball joint separator 300 mm 12",to remove ball joints from spindle support arms without damaging other componets,so you know it will do the job right.It can be usedon wide variety of vehicles from compact cars to light-duty trucks .It's 300 mm long for the reach you need and has a 24mm fork spread length 300 mm opening 24 mm

Crankshaft pulley removal tool set

Crankshaft pulley removal tool set 2

In Stock

Δίποδοι εξολκείς

Crankshaft pulley removal tool set

Pulley removal tool set enables fast and simple removal of crankshaft and auxiliary pulleys, even in a confined space . Crome molybdenum legs with thin jaws allows removal of pulleys with narrow tolerance between pulley and block for pulleys on passenger cars up to 132 mm appropriate for areas with restricted access with extraction book for effective...

Double Cup Valve Grinders 2pc

Double Cup Valve Grinders 2pc 2

In Stock

Tools for cars engine valve

Double Cup Valve Grinders 2pc

For hand lapping valves and valve seats. 4 different size suction cups 5/8", 13/16", 1-1/8", 1-3/8 (16-20mm & 28-35mm.) Synthetic rubber cups are resistant to chemical agents. Non-slip cups are groove locked to handle. Hardwood handles.

16 other products in the same category:

3PCS 1/2' LONG IMPACT SOCKETS WITH PLASTIC COVER

3PCS 1/2' LONG IMPACT SOCKETS WITH PLASTIC COVER 2

In Stock

Εργαλεία τροχών,μετάδοσης,ανάρτησης

3PCS 1/2' LONG IMPACT SOCKETS WITH PLASTIC COVER

3PCS 1/2' long impact socket with plastic cover Super SLIM impact sockets with plastic coating provide protection against scratching the aluminum rim when mounting the socket on the wheel bolt. Outer diameter of the working part of the socket with cover: 17mm (27mm), 19mm (28mm), 21mm (32mm) 17mm – 1/2″ length 150mm 19mm – 1/2″ length 150mm 21mm – 1/2″...

Digital inflator gun

Digital inflator gun 2

In Stock

Εργαλεία τροχών,μετάδοσης,ανάρτησης

Digital inflator gun

Digital inflator gun use for most vehicles, such as car, suv, truck, motorcycle,bisycle e.t.c measurement units PSI,BAR, KPA, KG/CM2 andiskid handle is more comfortable clear dial,accurate reading , with backlit LCD display, to meet your pressure measurement needs throughout the day infatable handle bleed button metal chuck , easy to lock more accurately...

Heavy duty CV boot clamp pliers

Heavy duty CV boot clamp pliers 2

In Stock

Πενσοειδή συνεργείων

Heavy duty CV boot clamp pliers

Heavy duty CV boot clamp pliers with 3/8 torque drive for assembly of new stainless steel clamp bands on drive shafts where a torgue setting is reguired. The 3/8 torque wrench is ideal to provide the drive Two way jaws for hard to reach areas for fitting stainless steel bands on drive shafts where a torque setting is specified can be used by hand or with...

C.V. joint banding tool (with cutter)

C.V. joint banding tool (with cutter) 2

In Stock

Πενσοειδή συνεργείων

C.V. joint banding tool (with cutter)

C.V. joint banding tool (with cutter) Tool is easily removed by sliding sideways after winding has been completed use to installed into the tool tighten the "band-it"or strap style clamps on cv joint boots or on power steering rackand pinion steering gear boots

Ball joint tools for undercar tools 21 pcs

Ball joint tools for undercar tools 21 pcs 2

In Stock

Εργαλεία τροχών,μετάδοσης,ανάρτησης

Ball joint tools for undercar tools 21 pcs

Ball joint tools for undercar tools 21 pcs designed for disassembly/assembly of the suspension system, e.g. upper/lower ball joints, universal joints, brake anchor pins or connections requiring a suitable puller. The extensive kit allows for a wide range of applications, including two-wheel drive (2WD) and four-wheel drive (4WD) vehicles without the need...

Τyre lever 200mm

Τyre lever 200mm 2

In Stock

special tools for auto and moto.

Τyre lever 200mm

Toolsonline shop

Drop Forged Tyre Lever 200mm Manufactured from Chromium-vanadium steel Chrome satin finish. Tapered ends Drop Forged Tyre Lever Length: 200mm Width: 21mm Chrome Satin Finish Rust and Corrosion Resistant Tapered Ends

multi-purpose inner tie rod tool

multi-purpose inner tie rod tool 2

In Stock

special tools for auto and moto.

multi-purpose inner tie rod tool

This special tool should easily allow you to replace inner tie rod ends without removing the rack and pinion or other components. Also features a 33mm-42mm capacity and solid steel construction

Brake shoe adjustor tool

Brake shoe adjustor tool 2

In Stock

Εργαλεία φρένων

Brake shoe adjustor tool

Brake shoe adjustor tool,can be used for most of cars.Make adjusting easy even for strong springs.Angled blades allow the adjustment to operate and fit into tight spots

Coil spring compressor

Coil spring compressor 2

Out-of-Stock

special tools for auto and moto.

Coil spring compressor

Toolsonline shop

2 NEW HEAVY DUTY STRUT SPRING COMPRESSOR SET 2 PC. STRUT AND COIL SPRING COMPRESSOR IDEAL FOR REMOVAL AND INSTALLATION OF AUTO AND TRUCK COIL SPRING AND STRUTS. STRONG STEEL JAWS SECURELY HOOKS INTO COILS USE ON OR OFF THE CAR HEAT TREATED SCREW

View

Tyre lever 380mm

Tyre lever 380mm 2

special tools for auto and moto.

Tyre lever 380mm

Toolsonline shop

Drop Forged Tyre Lever 380mm Manufactured from Chromium-vanadium steel Chrome satin finish. Tapered ends Drop Forged Tyre Lever Length: 380mm Width: 20mm Chrome Satin Finish Rust and Corrosion Resistant Tapered Ends

Inner spring compressor kit for MERCEDES coil spring compressor

Inner spring compressor kit for MERCEDES coil spring compressor 2

In Stock

Εργαλεία τροχών,μετάδοσης,ανάρτησης

Inner spring compressor kit for MERCEDES coil spring compressor

Inner spring compressor kit for MERCEDES coil spring compressor, this tool can remove and install automotive coil springs to a range of 185 up to 380 mm and 150 mm spring diameter, minimum width of the clamping arms 95 mm (important to access into the wishbone) Inner coil spring compressor suitable with long arms to remove and install a wide range of...

Τyre lever 650 mm

Τyre lever 650 mm 2

In Stock

Εργαλεία τροχών,μετάδοσης,ανάρτησης

Τyre lever 650 mm

Toolsonline shop

1233-650-1248-2

Drop Forged Tyre Lever 650 mm Manufactured from Chromium-vanadium steel Chrome satin finish. Tapered ends Drop Forged Tyre Lever Length: 650 mm Width: 30 mm Chrome Satin Finish Rust and Corrosion Resistant Tapered Ends

Harmonic balancer puller set

Harmonic balancer puller set 2

Out-of-Stock

Εξολκείς αυτοκινήτων-μοτοσυκλετών

Harmonic balancer puller set

Toolsonline shop

Harmonic balancer puller set, removes balancers, pulleys and gears with tapped holes. Floating swivel prevents damage to shaft end.Four slots in yoke for two or three hole application.Bolt tool to balancer with center screw on end of crank shaft.Tighten while tapping on end of screw head to remove balancer.

View

CV boot clamp pliers

CV boot clamp pliers 2

In Stock

Πενσοειδή συνεργείων

CV boot clamp pliers

A sturdy tool,works on earless -type clamps including those found on GM in board CV joint .Special purpose clamping knife for safe and quick work for earless, shafts, CVs, for General Motors and more durable and specialized collar tool can tighten in all positions length 210 mm a specialized tool for GM automobile collars

Τyre lever 300 mm

Τyre lever 300 mm 2

In Stock

Εργαλεία τροχών,μετάδοσης,ανάρτησης

Τyre lever 300 mm

Toolsonline shop

Drop Forged Tyre Lever 300 mm Manufactured from Chromium-vanadium steel Chrome satin finish. Tapered ends Drop Forged Tyre Lever Length: 300 mm Width: 28 mm Rust and Corrosion Resistant

Heavy duty jack stands 6tn

Heavy duty jack stands 6tn 2

In Stock

Εργαλεία τροχών,μετάδοσης,ανάρτησης

Heavy duty jack stands 6tn

Work securely and securely underneath your vehicle with the 6-Ton Steel Jack Stands. The stands feature lock protection and a safety pin design that helps ensure safe use. The dual purpose handle serves as a carry handle and has a saddle column release. Constructed of superior, heavy duty steel for strength and durability Self-locking racket provides fine...

Product added to wishlist

Product added to compare.

To better serve our users we use Cookies. By choosing to continue consented to using Cookies.