List of products by brand Force tools

In Stock

Cross vise drill press

Drilling press vise 150 mm , 6"

Force tools

868-6-6540406

€49.00

Drilling press vise 150 mm , 6" jaw opening 150 mm / 6'' jaw width :25 mm size 240 mm x 225 mm weight : 4,820 kgr

In Stock

Tools for cars engine valve

overhead valve spring compressor

Force tools

107-62109

€32.20

For use on a wide range of OHV, OHC and CVH engines but not suitable for use on engines with deep seated valves. Allows valve springs and valve stem oil seals to be replaced with the cylinder head. Features a reversible Jaw-adaptor and an automatic cam-action locking to a pre-determind setting.

In Stock

Εργαλεία καυσίμων

Fuel tank sender wrench adjustable 89mm-170mm

Force tools

245-89-170

€54.00

Fuel tank sender wrench adjustable 89mm-170mm drive with 16mm socket adjustable 88mm-170mm knurled lock to mentain position of arms universal use remove and refit collars without damage

In Stock

Εργαλεία μηχανικών -συνεργείων

3pc scraper knife set

Force tools

528-903M1

€19.20

3pc scraper knife set.Scraper Set for cleaning and scraping flanges, adhesives, dry oils, grease etc. Stainless steel with sturdy wooden handle and knife edge for easy operation. stainless steel blade width 15 mm, 20 mm, 30 mm wooden handle, durable, long, convenient, with a hole for storage stainless steel blade, high quality.

In Stock

special tools for auto and moto.

Car light tester 6-24 V

Force tools

287-88423

€5.30

Car light tester 6-24 V checks 6-24 volts system solid brass body with a test light prod tip is covered with a brass protective screw cap 850 mm cable with an alligator clip on the end

In Stock

Καρυδάκια για μπουζί

Magnetic spark plug socket 16mm,1/2 drive

Force tools

355-16

€4.60

Magnetic spark plug socket 16mm,1/2 drive,70 mm long

In Stock

special tools for auto and moto.

Engine cylinder hone 50MM-178MM

Force tools

48-9G0901 FORCE

€26.20

Cylinder hones are an integral part of the tooling needed for engine reconditioning.Allows you to hone engine cylinder bores from 2" to 7" (50mm to 178mm). This hone has three replaceable 100mm long x 10mm wide stones and are fitted with a flexible drive shaft. A twist collar keeps the stones retracted for easy insertion into the cylinder reducing the...

In Stock

Oil change tools,oil filter tools

Cup type oil filter 65mm,14 flutes

Force tools

349-65-14

€5.70

65MM oil filter wrench with 14 flutes is suitable for use on eco filters on :TOYOTA ,NISSAN,DAIHATSU,HONDA,KAWASAKI,LEXUW MAZDA,FIAT e.t.c

In Stock

Oil change tools,oil filter tools

Cup type oil filter 76mm,14 flutes

Force tools

311-61917-7614

€5.60

76mm oil filter wrench with 14 flutes is suitable for use on eco filters on AUDI,BMW,MERCEDES-BENZ,PORCE,VOLKSWAGEN etc.

In Stock

Engine timing tools

Timing tool kit for VW,SEAT,AUDI,SKODA, 1.0,1.2,1.4,TSI,TFSI,TGI

Force tools

318-906G10

€112.00

Timing tool kit for VW,SEAT,AUDI,SKODA, 1.0,1.2,1.4,TSI,TFSI,TGI,3and 4 cyl

In Stock

Εργαλεία αισθητήρα λάμδα

Oxygen lamda sensor socket 27 mm ,1/2

Force tools

483-27

€11.80

Oxygen lamda sensor socket 27 mm ,1/2 drive Plug 27 mm, specially for the assembly and disassembly of the lambda sensor, with a slit on the side to prevent the cable from jamming. for 1/2 drive for 27 mm length 85 mm for the assembly and disassembly of the oxygen sensor. with slot on the side for convenient use without crashing the cable and causing...

In Stock

special tools for auto and moto.

3/8 TORQUE WRENCH 20-110NM

Force tools

54-6473380 FORCE

€48.90

Adjustable torque model for clockwise tightening. Readings in Nm Sensible and audible alarm on reaching preset torque value Supplied with test certificate by manufacturer Capacity 20 ~ 110Nm Length 380mm

In Stock

Πενσοειδή συνεργείων

CV boot clamp pliers

Force tools

482-62519

€9.80

A sturdy tool,works on earless -type clamps including those found on GM in board CV joint .Special purpose clamping knife for safe and quick work for earless, shafts, CVs, for General Motors and more durable and specialized collar tool can tighten in all positions length 210 mm a specialized tool for GM automobile collars

In Stock

Industrial Supplies

Thick jaws gear puller force

Force tools

65910 FORCE

€22.70

Thick jaws gear puller force.Depth 100mm.Bearing dimension 40-90mm.

In Stock

Industrial Supplies

Bearing puller kit

Force tools

133-66618

€40.40

For the removal of shaft mounted ball bearings within a housing, self locking hooks lock onto the ball bearing. The self locking arrangement means that the force applied is 100% utilised to give a straight pulling force at all times. Puller yoke with centre screw and twin arms. 2 x Threaded leg extensions 30 and 95 mm. 6 x Ball ended threaded puller...

In Stock

Workshop equipment

Clip Removal Pliers For Door Inner-Linings

Force tools

61-9Μ0101 FORCE

€13.80

Clip removal pliers,for removai of door inner-linings and other trim items held in place by plastic rivets.Spring-loaded pliers for quick removing staples, clips, door panels, fascia and trim supports without damage. Wide nose design to prevent breaking or tearing panels when undoing facings. Easy access into confined areas, such as bumper covers. Cushion...

In Stock

Workshop equipment

Angled flat band hose clamp pliers

Force tools

266-62522

€12.50

Angled flat band hose clamp pliers The 45° angle offset head enables the flat band hose clamp pliers to remove and install clamps in hard to reach areas. Pliers feature angled jaws with rotating tips to grip clamps at any angle. Locking latch securely holds clamp in position.

In Stock

Cross vise drill press

Drilling press vise 125 mm , 5"

Force tools

859-5-6540405

€38.00

Drilling press vise 125 mm , 5" jaw opening 125 mm / 5'' jaw width :25 mm size 220 mm x 250 mm weight : 3,86 kgr

In Stock

Socket set

1/2 Socket set 22 pc

Force tools

858-4223

€50.80

1/2 Socket set 22 pc 15 pc ,6 pt flank socket ,CR-V, 10 mm - 11 mm - 12 mm - 13 mm - 14 mm - 15 mm - 16 mm - 17 mm - 18 mm - 19 mm - 22 mm - 24 mm - 27 mm - 30 mm - 32 mm . 1 RATCHET HANDLE 2 Extension bar 125 mm , 250 mm 2 spark plug socket 16 and 20.6 1 universal joint 1 andaptor for extension 3/8 x 1/2 1 plastic case

In Stock

Workshop equipment

CLIC-R COLLAR HOSE PLIERS FORCE 9G0104

Force tools

9G0104 FORCE

€13.80

Heavy duty spring loaded pliers for fitting and removing clic and clic r hose clipsSuitable for releasing and refitting re-useable clic and clic r hose clips.Special jaw allows the change from fit to remove simply by turning the pliers over.Manufactured from chrome vanadium steel and then hardened and tempered Single rivet design Plastic covered handles...

In Stock

Cross vise drill press

Drilling press vise 100 mm , 4"

Force tools

853-4-6540404

€25.80

Drilling press vise 100 mm , 4" jaw opening 100 mm / 4'' jaw width :25 mm size 180 mm x 160 mm weight : 2.6 kgr

In Stock

Workshop equipment

Universal spark T-wrench magnetic 16mm

Force tools

257-807330016UM

€14.90

Universal spark T-wrench magnetic 16mm lengh 300mm socket magnetic 12pt ,16mm drive 3/8

In Stock

Hand Tools

Rectangular magnetic tray(2 magnets)

Force tools

317-88002

€12.40

Magnetic tray,will hold metal fasteners,screws,nuts,bolts,washers,cotter pins,drill bits,small brackets,keys,small bearings,spark plugs and anything else you can fit in it.Magnetic tray has magnetic base for affixing to metal objects such as vehicle bodywork,tool boxes etc. L242mm x W132mm 2 heavy duty magnets with durable rubber coating to help prevent...

In Stock

Βοηθητικά εργαλεία μηχανικών

Round magnetic tray,150 mm

Force tools

532-88001

€6.50

Round magnetic tray 150 mm,will hold metal fasteners,screws,nuts,bolts,washers,cotter pins,drill bits,small brackets,keys,small bearings,spark plugs and anything else you can fit in it.Magnetic tray has magnetic base for affixing to metal objects such as vehicle bodywork,tool boxes etc. 150 mm heavy duty magnet with durable rubber coating to help...

Showing 1-24 of 164 item(s)