- The paste sticks to the tool
- No dripping or splashing
- Ideal for working under difficult circumstances e.g. "Overhead use" and for machines without cooling device.
- USAGE:Application: Increases tool life and surface finish significantly when: SAWING, MILLING, TAPPING, GRINDING, DRILLING.
- For machining all kind of steels. Also excellent for extremely difficult materials such as titanium-, manganese,- cast steel,- chrome-nickel or molybdenum steels.
- Also excellent for all non-ferrous metals such as aluminum, copper, brass.
Customers who bought this product also bought:
Drill chuck arbors MT2 - B16 is used to adjust the chuck mainly to a vertical drill in the lathe and the milling machine. The drill chuck arbors MT2 -B16 serve to change the conicity of the drill - chuck MT2 - B16 Total length: 110 mm final diameter (the part inserted into the chuck cone): 15 mm - 16 mm rear part (the part that comes in the drill,...
Set of 5 screw extractors for removing sheared off screws and bolts m3 - m18.Simple drill a pilot hole in the broken screw in the left hand threaded extractor until bolt turns screw extractor 2.7 mm for screw Μ 3 - Μ 6 ή 1/8" - 1/4" screw extractor 3.4 mm for screw Μ 6 - Μ 8 ή 1/4" - 5/16" screw extractor 4 mm for screw Μ 8 - Μ 11 ή 5/16"-7/16"...
Lithium grease with high -pressure additives for all types ofmechanisms(bearings ,bushes,articulations)that work with very high loads.Excellent resistance to water and humid environments.Good sealing capacity and protection against corrosion.NLGI-2 consistency grease.Application temperature between -30and +130C.
special tools for auto and moto.
Trisco G-324 is the compressometer used in diagnostics of the cars possessing the gasoline engine. It is expected measurement of pressure level and identification of malfunctions in different systems and engine operation. Thanks to it, you will be able to understand in what state there is mechanical part of the engine. The compressometer is quickly and...
High tech multi-purpose grease for extreme pressure properties use with water eguipment.Designed for the lubrication and protection of all the mechanical parts.Prevents corrosion and wear in a marine operation. designed for use in the fresh /salt water and at high loads open gears ,chains,screws e.t.s
hand tap metric
Μ 3 X 0.5 HSS hand tap set, is the right tool to create a thread, ride on an inner surface easily and quickly. to make the thread M 3 X 0.8 we need to drill a 2.5 mm drill length total 50 mm ,length 20 mm set of 3 pieces, in a plastic case the collazo can be used with the collage jelly or the collage rat.
16 other products in the same category:
WURTH Multi oil spray,rust remover,lubricant,400ml rust remover excellent penetration properties ensure rapid penetration into rust and corrosion lubricant,eliminates creaking and squeaking sounds.Reduces friction and wear cleanser infiltration in dirt grease and oil residues quarantees a good cleaning performance corrosion protection contact spray resin...