Κώνοι για τσοκ

Showing 1-12 of 12 item(s)

In Stock

Κώνοι για τσοκ

Drill chuck arbors MT2 - B18

Drill chuck arbors MT2 - B18 is used to adjust the chuck mainly to a vertical drill in the lathe and the milling machine. The drill chuck arbors MT2 -B18 serve to change the conicity of the drill - chuck MT2 - B18 Total length: 117.5 mm final diameter (the part inserted into the chuck cone): 16.2 mm - 17.8 mm rear part (the part that comes in the drill,...

In Stock

Κώνοι για τσοκ

Ejecting drift for MK3

1275-7077-MK3

€11.00

Ejecting drift for MK3 , morce taper ejecting drift for use in the removal of morse taper chucks mk3 190 mm exquisite workmanship super hard

In Stock

Κώνοι για τσοκ

Drill chuck arbors MT3 - B22

861-ΜΤ3Β22

€7.80

Drill chuck arbors MT3 - B22 is used to adjust the chuck mainly to a vertical drill in the lathe and the milling machine. The drill chuck arbors MT3 -B22 serve to change the conicity of the drill - chuck MT3 - B22 Total length: 146 mm final diameter (the part inserted into the chuck cone): 23.825 mm - 20.20 mm rear part (the part that comes in the drill,...

In Stock

Κώνοι για τσοκ

Ejecting drift for MK1 & MK2

1266-7076-MK1-2

€7.00

Ejecting drift for MK1 & MK2 , morce taper ejecting drift for use in the removal of morse taper chucks mk1 & mk2 140 mm exquisite workmanship super hard

In Stock

Κώνοι για τσοκ

Drill chuck arbors MT3 - B18

547-ΜΤ3Β18

€7.50

Drill chuck arbors MT3 - B18 is used to adjust the chuck mainly to a vertical drill in the lathe and the milling machine. The drill chuck arbors MT3 -B18 serve to change the conicity of the drill - chuck MT2 - B18 Total length: 117.5 mm final diameter (the part inserted into the chuck cone): 16.2 mm - 17.8 mm rear part (the part that comes in the drill,...

In Stock

Κώνοι για τσοκ

Drill chuck arbors MT4 - B18

831-ΜΤ4Β18

€8.80

Drill chuck arbors MT4 - B18 is used to adjust the chuck mainly to a vertical drill in the lathe and the milling machine. The drill chuck arbors MT4 -B18 serve to change the conicity of the drill - chuck MT4 - B18 Total length: 162 mm final diameter (the part inserted into the chuck cone): 16.2 mm - 18 mm rear part (the part that comes in the drill,...

In Stock

Τσοκ δραπάνων-τορνου

Drill chuck arbors MT2 - B16

392-ΜΤ2-Β16

€3.50

Drill chuck arbors MT2 - B16 is used to adjust the chuck mainly to a vertical drill in the lathe and the milling machine. The drill chuck arbors MT2 -B16 serve to change the conicity of the drill - chuck MT2 - B16 Total length: 110 mm final diameter (the part inserted into the chuck cone): 15 mm - 16 mm rear part (the part that comes in the drill,...

In Stock

Κώνοι για τσοκ

Drill chuck arbors MT1 - B16

873-ΜΤ1Β16

€6.20

Drill chuck arbors MT1 - B16 is used to adjust the chuck mainly to a vertical drill in the lathe and the milling machine. The drill chuck arbors MT1 -B16 serve to change the conicity of the drill - chuck MT1 - B16 Total length: 95 mm final diameter (the part inserted into the chuck cone): 12.065 mm - 20.20 mm rear part (the part that comes in the drill,...

In Stock

Κώνοι για τσοκ

Drill chuck arbors MT2 - B22

870-ΜΤ2Β22

€7.50

Drill chuck arbors MT2 - B22 is used to adjust the chuck mainly to a vertical drill in the lathe and the milling machine. The drill chuck arbors MT2 -B22 serve to change the conicity of the drill - chuck MT2 - B22 Total length: 125 mm final diameter (the part inserted into the chuck cone): 19.8 mm - 21.793 mm B22 rear part (the part that comes in the...

In Stock

Κώνοι για τσοκ

Drill chuck arbors MT4 - B22

862-ΜΤ4Β22

€9.50

Drill chuck arbors MT4 - B22 is used to adjust the chuck mainly to a vertical drill in the lathe and the milling machine. The drill chuck arbors MT4 -B18 serve to change the conicity of the drill - chuck MT4 - B22 Total length: 171 mm final diameter (the part inserted into the chuck cone): 19.8 mm - 21.793 mm B22 rear part (the part that comes in the...

In Stock

Κώνοι για τσοκ

Drill chuck arbors MT4 - B16

830-ΜΤ4Β16

€6.80

Drill chuck arbors MT4 - B16 is used to adjust the chuck mainly to a vertical drill in the lathe and the milling machine. The drill chuck arbors MT4 -B16 serve to change the conicity of the drill - chuck MT4 - B16 Total length: 154 mm final diameter (the part inserted into the chuck cone): 14.5 mm - 15.733 mm rear part (the part that comes in the drill,...

In Stock

Κώνοι για τσοκ

Drill chuck arbors MT3 - B16

548-ΜΤ3Β16

€7.50

Drill chuck arbors MT3 - B16 is used to adjust the chuck mainly to a vertical drill in the lathe and the milling machine. The drill chuck arbors MT3 -B16 serve to change the conicity of the drill - chuck MT3 - B16 Total length: 134 mm final diameter (the part inserted into the chuck cone): 14.5 mm - 15.733 mm rear part (the part that comes in the drill,...