Micrometer 100 mm - 125 mm

Last items in stock
€27.00
Tax included

Micrometer 100 mm - 125 mm

  • measuring range : 100 mm -125 mm
  • resolution  :0.01mm
  • carbide-tipped measuring faces
  • smooth surface with chrome clear scale
  • with locking clamp
  • ratcet or friction sleeve locking device to ensure the accuracy of repeatability

You might also like

Χρειάζεσαι βοήθεια

Χρειάζεσαι βοήθεια;

Eίμαστε πάντα δίπλα σου
για να σου λύσουμε
οποιαδήποτε απορία.
Επικοινώνησε μαζί μας

210 2776 354

469-100
No reviews

6 other products in the same category:

2
Out of stock
Measuring instruments

Telescoping T bore gauge 6pcs set ,8mm-150mm,...

Toolsonline shop
233-6
€19.30
Telescoping gages are used for determining the true size of holes ,slots,and recesses up to 5/16"-6",8mm-150mm.The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.The final hole size is obtained by meazuring over the gage contacts with micrometer or calipers. 6 pieces range 8mm...
View
2
Available
Micrometer

Micrometer 125 mm - 150 mm

Toolsonline shop
470-125
€32.00
Micrometer 125 mm- 150 mm measuring range : 125 mm -150 mm resolution  :0.01mm carbide-tipped measuring faces smooth surface with chrome clear scale with locking clamp ratcet or friction sleeve locking device to ensure the accuracy of repeatability
2
Available
Measuring instruments

Micrometer 25mm-50mm

Toolsonline shop
193-2550
€18.50
Μicrometer 25 mm - 50mm
2
Available
Micrometer

Micrometer 75 mm - 100 mm

Toolsonline shop
450-75-100
€27.50
Micrometer 75 mm - 100 mm measuring range : 75 mm -100 mm resolution  :0.01mm carbide-tipped measuring faces smooth surface with chrome clear scale with locking clamp ratcet or friction sleeve locking device to ensure the accuracy of repeatability
2
Available
Measuring instruments

Micrometer 50mm-75mm

Toolsonline shop
332-50-75
€22.00
Micrometer 50mm -75mm measuring range : 50mm -75mm resolution  :0.01mm carbide-tipped measuring faces smooth surface with chrome clear scale with locking clamp ratcet or friction sleeve locking device to ensure the accuracy of repeatability

Customers who bought this product also bought:

2
Available
special tools for auto and moto.

Engine cylinder hone 50MM-178MM

48-9G0901 FORCE
€24.80
Cylinder hones are an integral part of the tooling needed for engine reconditioning.Allows you to hone engine cylinder bores from 2" to 7" (50mm to 178mm). This hone has three replaceable 100mm long x 10mm wide stones and are fitted with a flexible drive shaft. A twist collar keeps the stones retracted for easy insertion into the cylinder reducing the...
2
Available
Measuring instruments

Screw pitch gauge

146-30145003
€6.50
A tread gauge also known as a screw pitch gauge or pitch gauge,is used to measure the pitch or lead of a screw thread.The uppermost gauge in the image is an ISO metric and whitworth screws pitch gauge. ISO METRIC 0,4 -0,5-0.6-0,7-0,75-0.8-0.9-1-1.25-1.5-1.75-2-2.5-3.0-3.5-4.0-5.0-5.5-6.5-7  WHITWORTH...
2
Available
special tools for auto and moto.

Tyre lever 240mm

174-1248-2-240
€5.40
Drop Forged Tyre Lever 240mm Manufactured from Chromium-vanadium steel  Chrome satin finish. Tapered ends  Drop Forged Tyre Lever Length: 240mm Width: 21mm Chrome Satin Finish Rust and Corrosion Resistant Tapered Ends
2
Out of stock
Όργανα μέτρησης ,διάγνωσης,τεστ,αυτοκινήτων-μοτοσυκλετών

Engine cylinder dial bore indicator gause...

Toolsonline shop
326-50-160
€78.00
Engine cylinder dial bore indicator gause kit, 50mm-160mm range 50 mm-160 mm,2"-6" for quick transferable accurate inside measurements ingludes all the necessary spacers, interchangeable extensions and a formed plastic case
View
2
Available
special tools for auto and moto.

Tyre lever 380mm

148-1248-2-380
€7.60
Drop Forged Tyre Lever 380mm Manufactured from Chromium-vanadium steel  Chrome satin finish. Tapered ends  Drop Forged Tyre Lever Length: 380mm Width: 20mm Chrome Satin Finish Rust and Corrosion Resistant Tapered Ends
2
Available
Measuring instruments

Precision steel rule,30cm,300mm

337-300
€2.90
Precision steel rule,30cm,300mm,two sides,one side metric and other side inch/metric
2
Out of stock
Measuring instruments

Telescoping T bore gauge 6pcs set ,8mm-150mm,...

Toolsonline shop
233-6
€19.30
Telescoping gages are used for determining the true size of holes ,slots,and recesses up to 5/16"-6",8mm-150mm.The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.The final hole size is obtained by meazuring over the gage contacts with micrometer or calipers. 6 pieces range 8mm...
View
Available
special tools for auto and moto.

BRAKE/ENGINE CYLINDER HONE 19 mm - 63.5 mm

49-9G0902 FORCE
€8.80
These cylinder hones from Force are perfectly suited for use on small engines and brake cylinders. They are a three stone style, adjustable in tension and size range from 3/4"(19mm) to 2 1/2"(63.5mm). A twist sleeve keeps the stones retracted to protect them and to make an easy job of inserting the hone into the bore. These hones are fitted with a...
Product added to wishlist
Product added to compare.

To better serve our users we use Cookies. By choosing to continue consented to using Cookies.