C.V. joint banding tool (with cutter)

Last items in stock

€20.96

Tax included

Tool is easily removed by sliding sideways after winding has been completed
use to installed into the tool tighten the "band-it"or strap style clamps on cv joint boots or on power steering rackand pinion steering gear boots

C.V. joint banding tool (with cu

Χρειάζεσαι βοήθεια

Χρειάζεσαι βοήθεια;

Eίμαστε πάντα δίπλα σου
για να σου λύσουμε
οποιαδήποτε απορία.
Επικοινώνησε μαζί μας

210 2776 354

Product Details
Reviews (0)

Reference 577-62525

No reviews

Customers who bought this product also bought:

In Stock

hand tap metric

Μ 5Χ0.8 HSS hand tap set

621-Μ5

€3.80

M 5X 0.8 HSS hand tap set, is the right tool to create a thread, ride on an inner surface easily and quickly. to make the thread M 5 X 0.8 we need to drill a 4.2 mm drill length total 50 mm ,length 20 mm set of 3 pieces, in a plastic case the collazo can be used with the collage jelly or the collage rat.

In Stock

Φλαντζωτό παξιμάδι DIN6923

M 8 hexagon nut with flange DIN6923 zing plated

411-8

€1.00

Hexagon nut with flange DIN6923 zing plated m8 The flange enables built up forces unter the nut to be spread over a larger albe,conseguently resulting in lower surf plessure large (overized) holes and or tooling holes can be covered by the flange washes are not necessary

In Stock

special tools for auto and moto.

universal clutch aligning tool

65-903T6

€12.90

Universal clutch alignment tool. For easy alignment and installation on the workbench. Suitable for most vehicles under 5 tons with a single plate clutch.

In Stock

Πενσοειδή συνεργείων

CV joint boot clamp pliers

Force tools

481-62520

€13.70

Clamp pliers bolt useful for car or car engineers, suitable for locking pin nuts, for CV joints, for ear-type clamps, Perma quick, shaft bushings etc. for most cars and motorcycles such as: BMW, VW, MERCEDES, AUDI, HONDA, NISSAN, MAZDA, OPEL etc length 230 mm compresses uniformly suitable for ball bearings, filters, cooling systems, vacuum lines, ball...

Workshop equipment

62802 Ball Joint Separator 20mm

21-62802

€19.70

Force 62802 features: Separator for track-rod ends, anti-roll bar mountings, ball joints etc Jaw opening: 20mm Force 62802 features: Separator for track-rod ends, anti-roll bar mountings, ball joints etc Jaw opening: 20mm

In Stock

special tools for auto and moto.

V-Coil 8mm x 125 Thread Repair Kit

259-8-125

€36.50

V-Coil 8mm x 125 Thread Repair Kit Complete thread repair kit - Including the required drill V-Coil tap and drill made from High Speed Steel V-Coil wire thread inserts manufactured from aerospace specification stainless steel Due to the narrow and accurate tolerances, the newly repaired thread is usually stronger than the original thread

In Stock

Πενσοειδή συνεργείων

CV boot clamp pliers

Force tools

482-62519

€13.70

A sturdy tool,works on earless -type clamps including those found on GM in board CV joint .Special purpose clamping knife for safe and quick work for earless, shafts, CVs, for General Motors and more durable and specialized collar tool can tighten in all positions length 210 mm a specialized tool for GM automobile collars

In Stock

Pliers

4 in 1 circlip pliers set

343-5

€7.50

In Stock

special tools for auto and moto.

Piston ring compressor 53-125

168-6203125

€10.30

Piston ring compressor . capacity :53-125 length :3"

In Stock

Cutting pliers

Professional hand tool diagonal cutting plier

1063-560166

€4.50

165 mm Professional hand tool diagonal cutting plier made of fine carbon steel hardened , tartness and orderliness fine polish and durable two color antislip pp handle with spring

16 other products in the same category:

Pliers

Long nose straight pliers 280 mm

Force tools

526-5047P1

€18.55

Long nose straight pliers 280 mmSuitable for restraint, assembly, adjustment work etc. in confined and inaccessible areas, such as car engines, machinery etc. total length 280 mm long arms allow to work in difficult, inaccessible and remote locations chrome vanadium lightweight insulated handles, anti-sweat and non-slip handle thin semi-round retaining...

Out-of-Stock

Workshop equipment

Angled flat band hose clamp pliers

Force tools

266-62522

€19.00

Angled flat band hose clamp pliers The 45° angle offset head enables the flat band hose clamp pliers to remove and install clamps in hard to reach areas. Pliers feature angled jaws with rotating tips to grip clamps at any angle. Locking latch securely holds clamp in position.

View

In Stock

Pliers

4 in 1 circlip pliers set

HARDEN TOOLS

343-5

€7.50

In Stock

Pliers

4 pcs internal external retaining clips snap ring circlip pliers set

HARDEN TOOLS

348-560524

€17.00

4 pcs internal external retaining clips snap ring circlip pliers set

In Stock

Πενσοειδή συνεργείων

Heavy duty CV boot clamp pliers

Force tools

778-62527

€58.15

Heavy duty CV boot clamp pliers with 3/8 torque drive for assembly of new stainless steel clamp bands on drive shafts where a torgue setting is reguired. The 3/8 torque wrench is ideal to provide the drive Two way jaws for hard to reach areas for fitting stainless steel bands on drive shafts where a torque setting is specified can be used by hand or with...

In Stock

Hand Tools

FLAT BAND HOSE CLAMP PLIERS

Force tools

63-62518 force

€12.00

Removes and installs new style flat band hose clamps. Jaws rotate to grip at any angle. A professional set of flat band hose clamp pliers suitable for the full time mechanic or engineer. For easy removal and installation of ring type hose clamps. Tips trap and hold clamp and swivel to allow access in confined areas and can be used at any angle. A Finger...

In Stock

Pliers

90 ° angle and extra long tip design for narrow space

Force tools

761-9U0102

€17.79

90 ° angle and extra long tip design for narrow space superb long nose circlip plier for reaching deep into cylinders and other hard to reach applications to extract the circlip can be used to remove and replace small to medium internal snap ring up to 56 mm deep

In Stock

Πενσοειδή συνεργείων

CV joint boot clamp pliers

Force tools

481-62520

€13.70

In Stock

Workshop equipment

CLIC-R COLLAR HOSE PLIERS FORCE 9G0104

Force tools

9G0104 FORCE

€14.90

Heavy duty spring loaded pliers for fitting and removing clic and clic r hose clipsSuitable for releasing and refitting re-useable clic and clic r hose clips.Special jaw allows the change from fit to remove simply by turning the pliers over.Manufactured from chrome vanadium steel and then hardened and tempered Single rivet design Plastic covered handles...

In Stock

Πενσοειδή συνεργείων

Multi purpose 4 points gripping pliers

Force tools

1076-5047P4

€20.65

Long nose multi purpose 4 points gripping pliers 280 mm ,suitable for restraint, assembly, adjustment work etc. in confined and inaccessible areas, such as car engines, machinery etc. total length 280 mm long arms allow to work in difficult, inaccessible and remote locations chrome vanadium lightweight insulated handles, anti-sweat and non-slip handle...

In Stock

Εργαλεία καυσίμων

Fuel line connector pliers

Force tools

252-9G0715

€20.95

Fuel line connector pliers specially designed for undoing quick release connections on fuel lines. For use with Vauxhall / Opel, Fiat & Volkswagen. Molded handles for easy grip. Length 160 mm.

In Stock

special tools for auto and moto.

Hose pinching pliers set 3pc

Force tools

253-903G12

€15.30

3pcs Flexible Nylon Hose Clamp Mixed Sizes Filling Hose Tool Kit Pinching Off Pliers For clamping flexible hoses. Made of heat-resistant reinforced nylon, each includes a locking mechanism. One small clamp for 1/8 "to 5/16" diameter. One medium clamp for 1/2 "to 3/4" diameter. One larger size clamp for 3/4 "to 1" diameter.

In Stock

Workshop equipment

Clip Removal Pliers For Door Inner-Linings

Force tools

61-9Μ0101 FORCE

€15.90

Clip removal pliers,for removai of door inner-linings and other trim items held in place by plastic rivets.Spring-loaded pliers for quick removing staples, clips, door panels, fascia and trim supports without damage. Wide nose design to prevent breaking or tearing panels when undoing facings. Easy access into confined areas, such as bumper covers. Cushion...

In Stock

Pliers

Long nose pliers ,280 mm ,90°

Force tools

696-5047P3

€18.85

Long nose pliers 280 mm ,90 °,suitable for restraint, assembly, adjustment work etc. in confined and inaccessible areas, such as car engines, machinery etc. total length 280 mm long arms allow to work in difficult, inaccessible and remote locations chrome vanadium lightweight insulated handles, anti-sweat and non-slip handle thin semi-round retaining...

In Stock

Εργαλεία τροχών,μετάδοσης,ανάρτησης

Wheel balancing weight tool , FORCE 6821

Force tools

1194-6821

€18.90

Wheel balancing weight tool , multipurbose tool easily removes and replacew wheel weights,as well as cutting and crimping made of heat-strengthened steel. imcluded comfortable vinyl handle grips. with self-open function spring on the handle for easier operation

In Stock

Εργαλεία καυσίμων

Fuel line pliers for VW,AUDI,OPEL,TOYOTA,MERCEDES

Force tools

99-9G0716

€29.00

Fuel line pliers quick and easy fuel connector removal and replacement. For use on fuel filter connectors during replacement. prevents fuel leakage from damaged fuel connectors. Applications:Audi,VW,GM Mercedes including M-class,Toyota,FIAT ,OPEL. Rrmoval of connector:pull the connector backwards with the pliers. replacing of connector:slide the connector...

C.V. joint banding tool (with cutter)

Χρειάζεσαι βοήθεια

Χρειάζεσαι βοήθεια;

Eίμαστε πάντα δίπλα σου για να σου λύσουμε οποιαδήποτε απορία.Επικοινώνησε μαζί μας

Customers who bought this product also bought:

16 other products in the same category:

Eίμαστε πάντα δίπλα σου
για να σου λύσουμε
οποιαδήποτε απορία.
Επικοινώνησε μαζί μας