1/2Torque wrench 40-210Nm

Last items in stock

€75.00

Tax included

Available units: Nm and lb/ft
Delivered in a plastic carrying case
Working range: 40-210 Nm (30-150 lb/ft)
Tool length: 535mm
Socket size: 1/2"

Set torque	Lower	Upper	Mean
203.40	195.26	211.54	206.65
122.04	117.16	126.92	121.23
40.68	39.05	42.31	40.27

The limits and the equipment used for the calibration comply with the requirements of:
BSEN 26789 & ISO 6789, ASME B107.14M & DIN3122
Test equipement uncertainty: ±1%

Χρειάζεσαι βοήθεια

Χρειάζεσαι βοήθεια;

Eίμαστε πάντα δίπλα σου
για να σου λύσουμε
οποιαδήποτε απορία.
Επικοινώνησε μαζί μας

210 2776 354

Product Details
Reviews (0)

Reference 55-6474535 FORCE

No reviews

Customers who bought this product also bought:

In Stock

Hollow punch set

6 pcs hollow punch set

549-9

€4.50

6 pcs hollow punch set .Heat treated high carbon steel construction. Precision ground flute and cutting edge .Cut clean holes in gasket ,leather,rubber,cardboard and other soft materials set:3 mm, 4mm, 5mm, 6mm, 7mm, 8mm

In Stock

κεντραδόρος τόρνου

Center drill 2.5mm HSS

163-25

€5.20

center drill,drill bit HSS DIN333A 2.5MM

In Stock

Reamer

6 mm hand reamer tool HSS

911-6

€17.00

Reamer 6 mm suitable for making a hole with precision. overall length: 95 mm Cutting length: 55 mm tool frame: 5x5 mm din: 206 B A reamer is a type of rotary cutting tool used in metalworking. Precision reamers are designed to enlarge the size of a previously formed hole with a small amount but with a high degree of accuracy to leave smooth sides....

In Stock

Tools for cars engine valve

VALVE SPRING COMPRESSOR SET 62110

78-62110 force

€46.75

Valve spring compressor .kit,this tools are designed to compress and release valve spring after removing the collets.Pantograph-type levers ensure a consistent coaxial contact with the valve. Contents:5pc driving adaptor 16mm,19mm,23mm,25mm,30mm. 3pc pressure screw 70mm,110mm,120mm. 1pc "C" CLAMP.

In Stock

Measuring instruments

Precision steel rule ,50 cm ,500 mm, 20"

382-500

€3.50

Precision steel rule,50 CM,500 MM , 20 " , one side inch/metric

In Stock

special tools for auto and moto.

Stud extractor set 4pc

132-5042

€27.70

Stud extractor set 4pc for remove treaded,broken,rusted stripped or smooth studs.4pc stud extractor 6MM,8MM,10MM,12MM

In Stock

Oil change tools,oil filter tools

8 mm ,square head drain plug socket

463-8

€4.50

8 mm ,square head drain plug socket for easy and stable unlocking of drainage cap. Suitable for PEUGEUOT, RENAULT, VOLVO, SUZUKI, FORD, JEEP, BMW, TOYOTA, CITROEN etc suitable for plugs with square female 8 mm for jerks, rattles, extensions, etc. with a 1/2 frame suitable for cars and motorcycles and many other applications suitable for PEUGEUOT, RENAULT,...

In Stock

special tools for auto and moto.

Force 9G1802 Torque angle meter magnetic

Force tools

56-9G1802 force

€23.45

Commonly used for tightening head bolts and other bolts where a torque angle is required.Use with 1/2" DR

In Stock

Working gloves

Nitrile disposable gloves black

462-100

€11.80

Nitrile disposable gloves black,durable, generic, for thousands of applications and ideal in workshops, workshops, hairdressers, cleaning workshops, paint workshops, tattoos, chemical laboratories, pharmaceuticals, etc. without powder suitable for right and left hand black colour one use not sterile with wrist support in packaging that we get what we...

In Stock

Καρυδάκια για μπουζί

Magnetic spark plug socket 14mm,1/2 drive

359-14

€5.20

Magnetic spark plug socket 14mm,1/2 drive,70mm long

16 other products in the same category:

In Stock

special tools for auto and moto.

1/2" DR ,12PT,impact deep socket 36mm

Force tools

277-4488536

€11.28

1/2" DR ,12PT,impact deep socket 36mm

In Stock

Χτυπητοί αριθμοί γράμματα

9PCS FIGURE PUNCH 4 ΜΜ

Toolsonline shop

1164-4

€7.80

9PCS FIGURE PUNCH 4 mm Carbon steel, hardened• Surface sandblasting• Packing: color box

Measuring instruments

Μicrometer 0 mm - 25mm

Toolsonline shop

185-0-25

€14.70

Μicrometer 0 mm - 25mm

In Stock

Hand Tools

Wheel nut 1/2 ,6pt. ,impact deep socket 19mm

Force tools

235-4458519C

€6.15

Wheel nut 1/2 ,6pt. ,impact deep socket 19mm size:19mm color:cold length:85mm impact socket made in chrome molybdenium with protective inserts for use on aluminium wheels

In Stock

Engine timing tools

FORD,MAZDA, timing tool set

Force tools

96-904G6

€23.81

FORD Timing tool set, 904G6 This camshaft setting bar updates the existing WT-2007 and is suitable for all the applications including the latest HWDA and HWDB engines. Content: Crankshaft Timing Pins (3) Alignment Plate.

Measuring instruments

Telescoping T bore gauge 6pcs set ,8mm-150mm, 5/16"-6"

Toolsonline shop

233-6

€24.50

Telescoping gages are used for determining the true size of holes ,slots,and recesses up to 5/16"-6",8mm-150mm.The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.The final hole size is obtained by meazuring over the gage contacts with micrometer or calipers. 6 pieces range 8mm...

In Stock

Oil change tools,oil filter tools

Oil suction gun ,SAMOA 800 cc

Toolsonline shop

1106-113910

€18.90

Oil suction gun ,SAMOA 800 cc, for lubricant sink and discharge for loading or refilling transmissions gear boxes,filters,etc.

In Stock

Workshop equipment

Clip Removal Pliers For Door Inner-Linings

Force tools

61-9Μ0101 FORCE

€15.90

Clip removal pliers,for removai of door inner-linings and other trim items held in place by plastic rivets.Spring-loaded pliers for quick removing staples, clips, door panels, fascia and trim supports without damage. Wide nose design to prevent breaking or tearing panels when undoing facings. Easy access into confined areas, such as bumper covers. Cushion...

In Stock

Tools for cars engine valve

overhead valve spring compressor

Force tools

107-62109

€39.40

For use on a wide range of OHV, OHC and CVH engines but not suitable for use on engines with deep seated valves. Allows valve springs and valve stem oil seals to be replaced with the cylinder head. Features a reversible Jaw-adaptor and an automatic cam-action locking to a pre-determind setting.

Out-of-Stock

special tools for auto and moto.

1/4" Lock torque wrench 6-30Nm

Force tools

53-6472295 FORCE

€65.00

6472295 - 1/4" Lock torque wrench 6-30Nm Available units: Nm and lb/ft Delivered in a plastic carrying case Working range: 6-30 Nm (5-22 lb/ft) Tool length: 295mm Socket size: 1/4"

View

special tools for auto and moto.

universal voltage tester AC/DC 6-400VOLT

Force tools

106-88408

€14.50

For professional, multi step testing of voltage and polarity with LED display. With 7 LED indications: 6V, 12V, 24V, 50V, 120V, 220V and 400V AC/DC. Force 88408 Voltage tester features: The voltages indicated are nominal values The display of the excessing of the upper limited value for low voltages only serves as a warning for the user and it is not a...

In Stock

special tools for auto and moto.

11PC star deep socket 3/8

Force tools

149-3112

€31.40

Star deep socket set . E4 E5 E6 E7 E8 E10 E11 E12 E14 E16 E18

In Stock

special tools for auto and moto.

Stud extractor set 4pc

Force tools

132-5042

€27.70

Stud extractor set 4pc for remove treaded,broken,rusted stripped or smooth studs.4pc stud extractor 6MM,8MM,10MM,12MM

In Stock

special tools for auto and moto.

Tyre lever 240mm

Toolsonline shop

174-1248-2-240

€7.20

Drop Forged Tyre Lever 240mm Manufactured from Chromium-vanadium steel Chrome satin finish. Tapered ends Drop Forged Tyre Lever Length: 240mm Width: 21mm Chrome Satin Finish Rust and Corrosion Resistant Tapered Ends

In Stock

special tools for auto and moto.

3/8 TORQUE WRENCH 20-110NM

Force tools

54-6473380 FORCE

€64.00

Adjustable torque model for clockwise tightening. Readings in Nm Sensible and audible alarm on reaching preset torque value Supplied with test certificate by manufacturer Capacity 20 ~ 110Nm Length 380mm

In Stock

Toolboxes - Set

drill bit set HSS 1-6mm in 0.1mm increments

werco

110-1.0-6.0

€43.75

Hss135 Deg Split PointGround high speed steel (HSS)General use for wood, metal and plasticsSizes from 1mm to 6mm in 0.1mm increments. 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6

1/2Torque wrench 40-210Nm

1/4" Lock torque wrench 6-30Nm

3/8 TORQUE WRENCH 20-110NM

Force 9G1802 Torque angle meter magnetic

Angular Torque Gauge

Χρειάζεσαι βοήθεια

Χρειάζεσαι βοήθεια;

Eίμαστε πάντα δίπλα σου
για να σου λύσουμε
οποιαδήποτε απορία.
Επικοινώνησε μαζί μας

1/4" Lock torque wrench 6-30Nm

3/8 TORQUE WRENCH 20-110NM

Force 9G1802 Torque angle meter magnetic

Angular Torque Gauge

Customers who bought this product also bought:

6 pcs hollow punch set

Center drill 2.5mm HSS

6 mm hand reamer tool HSS

VALVE SPRING COMPRESSOR SET 62110

Precision steel rule ,50 cm ,500 mm, 20"

Stud extractor set 4pc

8 mm ,square head drain plug socket

Force 9G1802 Torque angle meter magnetic

Nitrile disposable gloves black

Magnetic spark plug socket 14mm,1/2 drive

16 other products in the same category:

1/2" DR ,12PT,impact deep socket 36mm

9PCS FIGURE PUNCH 4 ΜΜ

Μicrometer 0 mm - 25mm

Wheel nut 1/2 ,6pt. ,impact deep socket 19mm

FORD,MAZDA, timing tool set

Telescoping T bore gauge 6pcs set ,8mm-150mm, 5/16"-6"

Oil suction gun ,SAMOA 800 cc

Clip Removal Pliers For Door Inner-Linings

overhead valve spring compressor

1/4" Lock torque wrench 6-30Nm

universal voltage tester AC/DC 6-400VOLT

11PC star deep socket 3/8

Stud extractor set 4pc

Tyre lever 240mm

3/8 TORQUE WRENCH 20-110NM

drill bit set HSS 1-6mm in 0.1mm increments

1/2Torque wrench 40-210Nm

Χρειάζεσαι βοήθεια

Χρειάζεσαι βοήθεια;

Eίμαστε πάντα δίπλα σου για να σου λύσουμε οποιαδήποτε απορία.Επικοινώνησε μαζί μας

Customers who bought this product also bought:

16 other products in the same category:

Eίμαστε πάντα δίπλα σου
για να σου λύσουμε
οποιαδήποτε απορία.
Επικοινώνησε μαζί μας