65805 Brake Caliper Wind Back Tool...

65805 Brake Caliper Wind Back Tool Set 18pcs FORCE

In Stock

€64.00

Tax included

Suitable for push back and wind back brake pistons, offers an efficient operation with both right and / or left helix bolt.

Applications: Alfa Romeo, Audi, BMW, Citroën, Fiat, Ford, Honda, Jaguar, Mazda, Mercedes Benz, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Subaru, Toyota, Volvo and VW.

Χρειάζεσαι βοήθεια

Χρειάζεσαι βοήθεια;

Eίμαστε πάντα δίπλα σου
για να σου λύσουμε
οποιαδήποτε απορία.
Επικοινώνησε μαζί μας

210 2776 354

Product Details
Reviews (0)

Reference 42-65805

No reviews

Customers who bought this product also bought:

4 pcs internal external...

4 pcs internal external... 2

In Stock

Pliers

4 pcs internal external retaining clips snap ring circlip pliers set

€17.00

4 pcs internal external retaining clips snap ring circlip pliers set

Clip Removal Pliers For...

Clip Removal Pliers For... 2

In Stock

Workshop equipment

Clip Removal Pliers For Door Inner-Linings

61-9Μ0101 FORCE

€15.90

Clip removal pliers,for removai of door inner-linings and other trim items held in place by plastic rivets.Spring-loaded pliers for quick removing staples, clips, door panels, fascia and trim supports without damage. Wide nose design to prevent breaking or tearing panels when undoing facings. Easy access into confined areas, such as bumper covers. Cushion...

extra long valve stem seal...

extra long valve stem seal... 2

In Stock

Tools for cars engine valve

extra long valve stem seal ring pliers

€13.90

extra long valve stem seal ring pliers. for removing valve stem seals in multi-valve engines. jaw longitudinal-toothed avoiding slipping down. for deeply levelled valve stem seals.

Impact driver set 17 pc,...

Impact driver set 17 pc,... 2

In Stock

Toolboxes - Set

Impact driver set 17 pc, force tools 5171

€26.90

Impact driver set 17 pc, force tools 5171.Instant impact force loosens rusted or frozen screws without damaging them. Content: 1Impact driver 1 impact bit holder 1/2 DR x5/16 1 bit adaptor5/16 HEX X3/8 SQ 1 bit PH2 ,L 36ΜΜ 1 bit PH3 ,L 36ΜΜ 1 bit PZ2 ,L 36ΜΜ 1 bit PZ3 ,L36ΜΜ 1 bit TORX T25 ,L35ΜΜ 1 bit TORX T30 ,L 35ΜΜ 1 bit TORX T40,L35ΜΜ 1 bit...

Star wrench set 4pc.

Star wrench set 4pc. 2

In Stock

special tools for auto and moto.

Star wrench set 4pc.

€20.70

Star wrench set 4pc Ε6ΧΕ8 Ε10ΧΕ12 Ε14ΧΕ18 Ε20ΧΕ24

Flare nut wrench set

Flare nut wrench set 2

In Stock

special tools for auto and moto.

Flare nut wrench set

€18.70

Flare nut wrench set set: 8x10 10x11 10x12 11x13 12x14 17x19

2 L Plastic Pressure home...

2 L Plastic Pressure home... 2

In Stock

Ψεκαστήρες

2 L Plastic Pressure home and garden sprayers,HARDEN

€6.20

2lt, multi-purpose hand pressure sprayer, high quality, useful in the garden, car, garage, etc. capacity 2 liters max operating pressure 3 BAR has an air pump that creates pressure conditions in the liquid and the firing takes place with the trigger of the trigger. Gardening, Plant Spraying, Spraying, Pesticides, Disinsection, Car Care, Detergents, Air...

Gamshaft and injection pump...

Gamshaft and injection pump... 2

In Stock

Toolsonline

Gamshaft and injection pump sprocket holding turning tool

€31.50

Gamshaft and injection pump sprocket holding turning tool.Essential tool called for on many timing belt-engine timing application.Used to counter -hold camshaft or ingection pump sprockets to allow release of retaining bolt. Universal for :VOLKSWAGEN,SEAT AND SKODA DIESEL,ROVER AND LAND ROVER DIESEL,RENAULT , FIAT,FORD CITROEN AND PEUGEOT

9 pc female E-torx star...

9 pc female E-torx star... 2

1/2" drive torx socket

9 pc female E-torx star socket set,1/2 drive

€24.00

9 pc female E-torx star socket set,1/2 drive. set contains:E10 , E11 , E12 , E14 , E16 , E18 , E20 ,E22 ,E24.

Tesa 51608 PET Fleece Tape...

Out-of-Stock

Κολες-χημικα-λιπαντικα.

Tesa 51608 PET Fleece Tape for Noise Damping Wiring Cloth Tape 19mm X 15m

€3.20

tesa® 51608 is the universal tape for wire harness bundling in the passenger compartment. It combines important features as noise dampening, abrasion resistance, and bundling strength while keeping harnesses flexible supporting an easy harness assembly process at the OEM. tesa® 51608 a PET fleece wire harness tape with a rubber based adhesive that is...

View

16 other products in the same category:

Hook wrench adjustable 35...

Hook wrench adjustable 35... 2

In Stock

Hand Tools

Hook wrench adjustable 35 mm - 50mm,3/4"-2"

€21.30

Hook wrench adjustable 20mm -50mm,3/4"-2".fully hardened,polished crome finish,drop forged,crome vanadium.

Ribe power bit set 14 pc

Ribe power bit set 14 pc 2

In Stock

special tools for auto and moto.

Ribe power bit set 14 pc

Toolsonline shop

€16.00

Ribe power bit set 14 pc 6pc-40L(10mm) power bit:M5,M6,M7,M8,M10,M12 7pc -75L(10MM) power bit :M7,M8,M9,M10,M12,M13,M14 1PC-1/2"X10MM adaptor

62802 Ball Joint Separator...

Workshop equipment

62802 Ball Joint Separator 20mm

€19.70

Force 62802 features: Separator for track-rod ends, anti-roll bar mountings, ball joints etc Jaw opening: 20mm Force 62802 features: Separator for track-rod ends, anti-roll bar mountings, ball joints etc Jaw opening: 20mm

Tyre lever 240mm

Tyre lever 240mm 2

In Stock

special tools for auto and moto.

Tyre lever 240mm

Toolsonline shop

€7.20

Drop Forged Tyre Lever 240mm Manufactured from Chromium-vanadium steel Chrome satin finish. Tapered ends Drop Forged Tyre Lever Length: 240mm Width: 21mm Chrome Satin Finish Rust and Corrosion Resistant Tapered Ends

Bearing separator 30-50mm

In Stock

Industrial Supplies

Bearing separator 30-50mm

€18.85

Bearing seperator ,Manufactured from drop-forged, hardened alloy steel. These industrial quality bearing separators are designed for removing bearings where there is access behind the bearings.Capacity 30-50mm,bolt 9.5mmx125mmL.Hole 8.2mmx3/8"x16t

9PCS FIGURE PUNCH 4 ΜΜ

9PCS FIGURE PUNCH 4 ΜΜ 2

In Stock

Χτυπητοί αριθμοί γράμματα

9PCS FIGURE PUNCH 4 ΜΜ

Toolsonline shop

€7.80

9PCS FIGURE PUNCH 4 mm Carbon steel, hardened• Surface sandblasting• Packing: color box

Adjustable fuel tank lid...

Adjustable fuel tank lid... 2

In Stock

Εργαλεία καυσίμων

Adjustable fuel tank lid remover, 30 mm - 160 mm

€15.25

Adjustable fuel tank lid remover, 30 mm - 160 mm Universal adjustable tool for application on most cars as BMW, Mercedes Benz and VAG. Jaw adjustable range:30 mm - 160 mm Suitable for different fuel tank lids as on BMW, Mercedes Benz and VAG (Audi, VW) Use with Wrench. spesial jaws designed to remove and install the tank closely.

9PCS FIGURE PUNCH 7 MM

9PCS FIGURE PUNCH 7 MM 2

In Stock

Χτυπητοί αριθμοί γράμματα

9PCS FIGURE PUNCH 7 MM

Toolsonline shop

€12.50

9PCS FIGURE PUNCH. 7 mm Carbon steel, hardened• Surface sandblasting• Packing: color box

Screw pitch gauge

Screw pitch gauge 2

In Stock

Measuring instruments

Screw pitch gauge

Toolsonline shop

€8.90

A tread gauge also known as a screw pitch gauge or pitch gauge,is used to measure the pitch or lead of a screw thread.The uppermost gauge in the image is an ISO metric and whitworth screws pitch gauge. ISO METRIC 0,4 -0,5-0.6-0,7-0,75-0.8-0.9-1-1.25-1.5-1.75-2-2.5-3.0-3.5-4.0-5.0-5.5-6.5-7 WHITWORTH...

Bearing separator 75-105mm

Bearing separator 75-105mm 2

In Stock

Αποκολλητές ρουλεμάν

Bearing separator 75-105mm

€29.00

Bearing seperator 75 mm - 105 mm ,Manufactured from drop-forged, hardened alloy steel. These industrial quality bearing separators are designed for removing bearings where there is access behind the bearings. Capacity 75-105mm

Bearing puller kit

Bearing puller kit 2

In Stock

Δίποδοι εξολκείς

Bearing puller kit

€73.35

For the removal of shaft mounted ball bearings within a housing, self locking hooks lock onto the ball bearing. The self locking arrangement means that the force applied is 100% utilised to give a straight pulling force at all times. Puller yoke with centre screw and twin arms. 2 x Threaded leg extensions 40 and 90 mm. 6 x Ball ended threaded puller...

Force 9G1802 Torque angle...

Force 9G1802 Torque angle... 2

In Stock

special tools for auto and moto.

Force 9G1802 Torque angle meter magnetic

56-9G1802 force

€23.45

Commonly used for tightening head bolts and other bolts where a torque angle is required.Use with 1/2" DR

Bearing separator 75-105mm

Industrial Supplies

Bearing separator 75-105mm

€32.95

Bearing seperator ,Manufactured from drop-forged, hardened alloy steel. These industrial quality bearing separators are designed for removing bearings where there is access behind the bearings.Capacity 75-105mm,bolt 16mmx165mmL.Hole 11.2mmx1/2"x12t

Deep socket set 8pc

Toolboxes - Set

Deep socket set 8pc

€26.80

Deep socket set 1/2 8pc: 13MM 14MM 15MM 17MM 19MM 21MM 22MM 24MM. 77MMLONG

Adjustable fuel tank lid...

Adjustable fuel tank lid... 2

Εργαλεία καυσίμων

Adjustable fuel tank lid remover

€35.46

Adjustable fuel tank lid remover Universal adjustable tool for application on most cars as BMW, Mercedes Benz and VAG. Jaw adjustable range: 122-199 mm Suitable for different fuel tank lids as on BMW, Mercedes Benz and VAG (Audi, VW) Use with 3/8" Wrench. spesial jaws designed to remove and install the tank closely.

Bit set ,40 pc torx, hex,...

Bit set ,40 pc torx, hex,... 2

In Stock

Toolboxes - Set

Bit set ,40 pc torx, hex, spline

€20.80

Bit set 40 pc content: Hex bit 4-5-6-7-8-10-12mm (30mm) Hex bit 4-5-6-7-8-10-12mm (75mm) Star bit T20-T25-T30-T40-T45-T50-T55 (30mm) Star bit T20-T25-T30-T40-T45-T50-T55 (75mm) Spline bit M5-M6-M8-M10-M12 (30mm) Spline bit M5-M6-M8-M10-M12 (75mm) Bit holder 3/8" x 10mm Bit holder 1/2" x 10mm

Product added to wishlist

Product added to compare.

To better serve our users we use Cookies. By choosing to continue consented to using Cookies.