Tools

Hand Tools

Measuring instruments

Εξαρτήματα Εργαλείων

Power tools

Εργαλεία Αέρα & Αξεσουάρ

Δομικά Υλικά

Ηλεκτροκολλήσεις

Γεννήτριες

In Stock

Μηχανουργικα

10 inch mill file

98-10

€10.50

10 inch mill fill , BASSOLI ITALY Parallel rectangular profile straightens edges and squares interior corners Medium-coarse, second-cut grade is ideal for deburring, shaping, and sharpening Cross-cut teeth remove material quickly for fast rough-shaping

In Stock

Pliers

4 pcs internal external retaining clips snap ring circlip pliers set

348-4

€17.00

4 pcs internal external retaining clips snap ring circlip pliers set

In Stock

Καρυδάκια για μπουζί

Magnetic spark plug socket 16mm,1/2 drive

355-16

€4.60

Magnetic spark plug socket 16mm,1/2 drive,70 mm long

In Stock

Μέγγενες ,σεπόρτια,μέγγενες δραπάνου

2-way cross slide vise ,support

85-f105

€79.80

Keep your drill press in the desired position with this four-cross drill press vise. This two-way clamping machine features a three-inch jaw width and opening. It also features a one-inch jaw depth for attaining a tight grasp. The cast iron construction is made for rugged applications. The steel jaws are serrated, and the screws are made from cold-rolled...

In Stock

Αξεσουάρ ηλεκτρικών εργαλείων

Cotton buffing wheel for metal and glass

170-339.30

€5.50

Cotton buffing wheel for metal and glass

In Stock

Μέγγενες ,σεπόρτια,μέγγενες δραπάνου

Two -way cross slide vise 100ΜΜ-4"

122-F201

€97.80

In Stock

Lathe chuck Three jaw self centring chucks

80 mm Lathe chuck 3 jaw manuel chuck self centering lathe tool

765-Κ11-80

€75.00

80 mm Lathe chuck 3 jaw manuel chuck self centering lathe tool. diameter :80 mm thickness:50 mm center hole :16 mm bolt circle diameter :55 mm runout :0.08 internal jaw :clamping range A - A1 2 mm - 22 mm, jamming range B - B1 : 25 mm - 70 mm external jaw :clamping range c - c1 : 22 mm - 63 mm max RPM :4000 R/MIN JAW :3 JAW high precision:<0.05 mm...

In Stock

Lathe chuck Three jaw self centring chucks

100 mm Lathe chuck 3 jaw manuel chuck self centering lathe tool

769-Κ11-100

€77.00

100 mm Lathe chuck 3 jaw manuel chuck self centering lathe tool. diameter :100 mm thickness:H=75mm,H1=55 mm center hole :22 mm bolt circle diameter :84 mm runout :0.08 internal jaw :clamping range A - A1 2 mm - 30 mm, jamming range B - B1 : 30 mm - 90 mm external jaw :clamping range c - c1 : 30 mm - 80 mm max RPM :3800 R/MIN JAW :3 JAW high...

Lathe chuck Three jaw self centring chucks

125 mm Lathe chuck 3 jaw manuel chuck self centering lathe tool

768-Κ11-125

€88.00

125 mm Lathe chuck 3 jaw manuel chuck self centering lathe tool. diameter :125 mm thickness:H=84mm,H1=58 mm center hole :30 mm bolt circle diameter :226 mm runout :0.08 internal jaw :clamping range A - A1 2.5 mm - 40 mm, jamming range B - B1 : 38 mm - 125 mm external jaw :clamping range c - c1 : 38 mm - 110 mm max RPM :3800 R/MIN JAW :3 JAW high...

In Stock

Lathe chuck Three jaw self centring chucks

160 mm Lathe chuck 3 jaw manuel chuck self centering lathe tool

767-Κ11-160

€124.00

160 mm Lathe chuck 3 jaw manuel chuck self centering lathe tool. diameter :160 mm thickness:H=95mm,H1=65 mm center hole :45 mm bolt circle diameter :142 mm runout :0.08 internal jaw :clamping range A - A1 3 mm - 55 mm, jamming range B - B1 : 50 mm - 160 mm external jaw :clamping range c - c1 : 55 mm - 145 mm max RPM :2500 R/MIN JAW :3 JAW high...

In Stock

Lathe chuck Three jaw self centring chucks

200 mm Lathe chuck 3 jaw manuel chuck self centering lathe tool

764-Κ11-200

€170.00

200 mm Lathe chuck 3 jaw manuel chuck self centering lathe tool. diameter :200 mm thickness:75 mm center hole :65 mm bolt circle diameter :180 mm runout :0.08 internal jaw :clamping range A - A1 4 mm - 85 mm, jamming range B - B1 : 65 mm - 200 mm external jaw :clamping range c - c1 : 65 mm - 200 mm max RPM :3000 R/MIN JAW :3 JAW high precision:<0.05...

In Stock

Lathe chuck Three jaw self centring chucks

250 mm Lathe chuck 3 jaw manuel chuck self centering lathe tool

766-Κ11-250

€230.00

250 mm Lathe chuck 3 jaw manuel chuck self centering lathe tool. diameter :250 mm thickness:H=120mm,H1=80 mm center hole :80 mm bolt circle diameter :226 mm runout :0.08 internal jaw :clamping range A - A1 6 mm - 110 mm, jamming range B - B1 : 80 mm - 250 mm external jaw :clamping range c - c1 : 90 mm - 250 mm max RPM :2400 R/MIN JAW :3 JAW high...

In Stock

Toolsonline

46 PCS socket tool sets 1/4

172-MLG-JF-1046

€19.00

46PC 1/4 SOCKET SET Pins: 4-4,5-5-5,5-6-7-8-9-10-11-12-13-14mm Allen Nose Knuckle: 3-4-5-6-7-8 x 32mm Torx nuts type: T8-T10-T15-T20-T25-T27-T30-T40 x 32mm Nose claws straight: 4-5,5-7 x 32mm Cross nose cords: PH1-PH2-PH3 x 32mm Pozidrive nose cords: PZ1-PZ2-PZ3 x 32mm Chestnut Extension: 50mm Extension: 100mm A broken cross T-shirt Screwdriver for...

In Stock

Εργαλεία αισθητήρα λάμδα

Oxygen lamda sensor socket 27 mm ,1/2

483-27

€11.80

Oxygen lamda sensor socket 27 mm ,1/2 drive Plug 27 mm, specially for the assembly and disassembly of the lambda sensor, with a slit on the side to prevent the cable from jamming. for 1/2 drive for 27 mm length 85 mm for the assembly and disassembly of the oxygen sensor. with slot on the side for convenient use without crashing the cable and causing...

In Stock

special tools for auto and moto.

3/8 TORQUE WRENCH 20-110NM

54-6473380 FORCE

€48.90

Adjustable torque model for clockwise tightening. Readings in Nm Sensible and audible alarm on reaching preset torque value Supplied with test certificate by manufacturer Capacity 20 ~ 110Nm Length 380mm

Μέγγενες ,σεπόρτια,μέγγενες δραπάνου

3 " vise pipes

557-3

€38.50

3 " vice pipe, if you cut or screw multiple tubes, or clamp for tubes from 10 mm to 89 mm is made for you. 3 'for pipes from 10 mm to 89 mm durable construction has a hinged quick release mechanism to accelerate production and secure the tube to the desired position heavy duty jaws and a convenient V-tube holder that hold the workpiece firmly in place...

Out-of-Stock

Μέγγενες ,σεπόρτια,μέγγενες δραπάνου

Vice tolsen 150MM

160-10105

€74.00

Vice tolsen 150MM Vice designed to attach to a desk Allows securing parts subjected to mechanical operations (sawing, drilling, milling, shaping, marking, etc.) It has 3 holes for fixing to the workbench

View

In Stock

Μέγγενες ,σεπόρτια,μέγγενες δραπάνου

Vice 100mm

31-100

€43.00

Vise designed to attach to a desk Allows securing parts subjected to mechanical operations (sawing, drilling, milling, shaping, marking, etc.) It has 3 holes for fixing to the workbench

In Stock

Μέγγενες ,σεπόρτια,μέγγενες δραπάνου

Vice tools 50mm Tolsen

32-10107

€15.80

Vice 50 mm. Vise designed to attach to a desk. Allows holding pieces subjected to mechanical operations (sawing, drilling, milling, shaping, marking, etc.). It has tourniquet pressure clamp for fixing to the workbench. Tourniquet has open/close the clamp, which allows a maximum opening of 50 mm (2 ") Width of jaw:.. 50 mm base allows a rotation of 360...

Out-of-Stock

Μέγγενες ,σεπόρτια,μέγγενες δραπάνου

360° rotatable parallel bench vice with anvil 200 mm

615-200

€98.00

View

In Stock

Industrial Supplies

Thick jaws gear puller force

65910 FORCE

€22.70

Thick jaws gear puller force.Depth 100mm.Bearing dimension 40-90mm.

In Stock

Industrial Supplies

Bearing puller kit

133-66618

€40.40

For the removal of shaft mounted ball bearings within a housing, self locking hooks lock onto the ball bearing. The self locking arrangement means that the force applied is 100% utilised to give a straight pulling force at all times. Puller yoke with centre screw and twin arms. 2 x Threaded leg extensions 30 and 95 mm. 6 x Ball ended threaded puller...

In Stock

Εργαλεία Αέρα & Αξεσουάρ

Oil spray gun

864-28Α

€10.40

Oil spray gun is perfect for use on small to medium sized work surfaces, suitable for oil and other liquids. The spray gun provides an exect regulation of air and oil

In Stock

Angle Grinder Grinding wheels

115 mm Flap Discs wheels grinding sanding P 120

863-120

€2.20

115 mm Flap Discs wheels grinding sanding P 120 grit angle grider made of high-quality materials, durable low vibration , low noise, smooth grinding, no dents, no burrs, and no discoloration outer diameter 115 mm suitable for different angle griders used for removing welds, deburring, rust removal, casting cleaning, surface fine treatment etc suitable...

Showing 1-24 of 337 item(s)

Product added to wishlist

Product added to compare.

To better serve our users we use Cookies. By choosing to continue consented to using Cookies.