Angled flat band hose clamp pliers

Out-of-Stock

€19.00

Tax included

The 45° angle offset head enables the flat band hose clamp pliers to remove and install clamps in hard to reach areas.

Pliers feature angled jaws with rotating tips to grip clamps at any angle.

Locking latch securely holds clamp in position.

Angled flat band hose clamp plie

Χρειάζεσαι βοήθεια

Χρειάζεσαι βοήθεια;

Eίμαστε πάντα δίπλα σου
για να σου λύσουμε
οποιαδήποτε απορία.
Επικοινώνησε μαζί μας

210 2776 354

Product Details
Reviews (0)

Reference 266-62522

No reviews

Customers who bought this product also bought:

In Stock

Κολάρα στήριξης - Τσέρκια

Hose clip,mini,for water,fuel,air,12 mm -13 mm

773-12-13

€0.25

Hose clip, mini, for water, fuel, air, 12 mm - 13 mm

In Stock

Ratchets 1/2

1/2" 600 mm swivel head breaker bar

517-8014600

€23.80

Split handle 1/2 very long, suitable for difficult situations, where nuts, screws, bolts, etc. are tightened and blocked. High strength for strong clamps. 1/2 frame suitable for mounting nuts, extensions, adapters, etc. 180 ° rotary head allows easy and fast operation even when there are obstacles. Length 600 mm high-strength Chrome vanadium handle. And...

In Stock

Oil change tools,oil filter tools

5pc fill/drain plug key set

723-5051

€12.80

5pc fill/drain plug key set,for easy removal of gearbox and back axle drain plugs as well as sump plugs.For use of most vehicles inclunding BMW , VAG,CITROEN,FORD,LANCIA,MAZDA,PEUGEOT,MERCEDES ,RENAULT,SAAB, content: square 8 mm square 13 mm square 11 mm square 3/8 hex 14 mm hex 17 mm hex 10 mm hex 12 mm hex 9 mm hex 5/16

In Stock

special tools for auto and moto.

Piston ring compressor 53-125

168-6203125

€10.30

Piston ring compressor . capacity :53-125 length :3"

In Stock

hand tap metric

M 4 X 0.7 HSS hand tap set

626-4

€4.20

M 4 X 0.7 HSS hand tap set, is the right tool to create a thread, ride on an inner surface easily and quickly. to make the thread M 4X 0.7 we need to drill a 3.3 mm drill length total mm ,length mm set of three pieces, in a plastic case the hand tap set can be used with the collage jelly or the collage rat.

Πενσοειδή συνεργείων

C.V. joint banding tool (with cutter)

577-62525

€20.96

C.V. joint banding tool (with cutter) Tool is easily removed by sliding sideways after winding has been completed use to installed into the tool tighten the "band-it"or strap style clamps on cv joint boots or on power steering rackand pinion steering gear boots

In Stock

Oil change tools,oil filter tools

Funnel with flex extension ,2-in-1

290-X

€2.50

Funnel with flex extension ,2-in-1. Chemical -resistant polyethylene construction mesh screen filters out damaging particles use for engine oil,cazoline,kerosene,engine fluids,etc. 2-in-1 deluxe funnel:145 mm funnel with removable 250mm flexible extension

Engine timing tools

timing tool kit for Opel,Suzuki,Fiat,diesel engine

95-904G5

€35.71

Designed to lock the cam- and crankshaft in position to allow the removal and replacement of the timing chain fitted to the Opel, Vauxhall, Suzuki and Fiat 1.3 Diesel engines. Content: Camshaft Alignment tools (2 pieces) Flywheel Alignment Pin Chain Tensioner Retaining Pin (OEM: 1.871.00.900, 104-A, 0198-J, 303-1472, 09912-38300, 09916-98610, 09917-68610,...

In Stock

Pin punch

6pcs pin punch set

737-610836

€11.50

6pcs pin punch set set : pin punch 1.5 mm pin punch 3 mm pin punch 4 mm pin punch 5 mm pin punch 6 mm pin punch 8 mm

In Stock

Κολες-χημικα-λιπαντικα.

Autosol metal polish

169-1000

€4.20

Autosol is a metal polish that no garage or workshop should be without. The paste is effective on all metals but it is especially effective on chrome, brass, bronze, copper and stainless steel. It is also suitable for use in marine and household applications where metal is common even in the kitchen sink! How easy is it to apply? It's simple to apply,...

16 other products in the same category:

In Stock

special tools for auto and moto.

Bit set ,40 pc torx,hex,spline

Force tools

135-4401

€35.00

Bit set 40 pc content: Hex bit 4-5-6-7-8-10-12mm (30mm) Hex bit 4-5-6-7-8-10-12mm (75mm) Star bit T20-T25-T30-T40-T45-T50-T55 (30mm) Star bit T20-T25-T30-T40-T45-T50-T55 (75mm) Spline bit M5-M6-M8-M10-M12 (30mm) Spline bit M5-M6-M8-M10-M12 (75mm) Bit holder 3/8" x 10mm Bit holder 1/2" x 10mm

In Stock

Μηχανουργικα

Μ10X100 HSS HAND TAP VOLKEL

Völkel tools

26336

€13.20

Μ10X100 HSS HAND TAP VOLKEL

In Stock

special tools for auto and moto.

BRAKE/ENGINE CYLINDER HONE 19 mm - 63.5 mm

Force tools

49-9G0902 FORCE

€9.70

These cylinder hones from Force are perfectly suited for use on small engines and brake cylinders. They are a three stone style, adjustable in tension and size range from 3/4"(19mm) to 2 1/2"(63.5mm). A twist sleeve keeps the stones retracted to protect them and to make an easy job of inserting the hone into the bore. These hones are fitted with a...

Engine timing tools

timing locking tools for Ford focus/cmax

Force tools

100-905G8

€45.14

Suitable for replacing the cam belt on FORD Focus/C-Max 1.6 Ti-VCT with engine code HXDA (2003 – 2007) plus 2.0 TDCI Suitable engine codes: G6DA, G6DB, G6DC and HXDA 2003 – 2007 Contents: Camshaft sprocket holding tool Tensioner Pulley locking pin Flywheel timing pin Crankshaft timing pin

In Stock

Μέγγενες ,σεπόρτια,μέγγενες δραπάνου

Vice tools 50mm Tolsen

Toolsonline shop

32-10107

€21.90

Vice 50 mm. Vise designed to attach to a desk. Allows holding pieces subjected to mechanical operations (sawing, drilling, milling, shaping, marking, etc.). It has tourniquet pressure clamp for fixing to the workbench. Tourniquet has open/close the clamp, which allows a maximum opening of 50 mm (2 ") Width of jaw:.. 50 mm base allows a rotation of 360...

In Stock

special tools for auto and moto.

Engine cylinder hone 50MM-178MM

Force tools

48-9G0901 FORCE

€27.90

Cylinder hones are an integral part of the tooling needed for engine reconditioning.Allows you to hone engine cylinder bores from 2" to 7" (50mm to 178mm). This hone has three replaceable 100mm long x 10mm wide stones and are fitted with a flexible drive shaft. A twist collar keeps the stones retracted for easy insertion into the cylinder reducing the...

In Stock

Screwdrivers

Impact driver set 14 pc, harden tools 550641

Toolsonline shop

695-550641

€14.00

Impact driver set 14 pc, .Instant impact force loosens rusted or frozen screws without damaging them. Content: 1Impact driver 1 impact bit holder 1/2 DR x5/16 1 bit PH1 ,L 36ΜΜ 1 bit PH2 ,L 36ΜΜ 1 bit PH3 ,L 36ΜΜ 1 bit PH4 ,L36ΜΜ 1 SLOTTED BIT 5 ΜΜ ,L 36 ΜΜ 1 SLOTTED BIT 6 ΜΜ ,L 36 ΜΜ 1 SLOTTED BIT 8 ΜΜ ,L 36 ΜΜ 1 SLOTTED BIT 9 ΜΜ ,L 36 ΜΜ 1...

In Stock

special tools for auto and moto.

BRAKE/ENGINE CYLINDER HONE 32ΜΜ-89ΜΜ(11/4"-31/2")

Toolsonline shop

50-0112

€12.50

-20%

Γυαλιά εργασίας

safety glasses UNIVET

Toolsonline shop

267-5Χ4.03.30.05

€10.32 €12.90

Extrame care of details and excellent ergonomics for a trendy and comfortable mode. anallergic nose pad for comfort without slippage very relaxing perfect colour recognitig solar lens designd on the basis of the spector luminous efficiencg curve of the human eye Applications: Outdoor work, constrauction sites,road works,driving vehicles

In Stock

Κολες-χημικα-λιπαντικα.

Thread-locking ,Saratoga-frena filetti -327

Toolsonline shop

246-327

€5.80

Thread-locking ,Saratoga-frena filetti -327 Thread-locking fluid or threadlocker is a thin, single-component adhesive applied to the threads of fasteners such as screws and bolts to prevent loosening, leakage, and corrosion. Most thread-locking formulas are methacrylate-based and rely on the electrochemical activity of a metal substrate to cause...

In Stock

Εξαρτήματα Εργαλείων

Speedout set

Toolsonline shop

20-SPEED OUT

€6.99

The SpeedOut screw-damaged screwdriver set includes 4 pulleys to meet all your needs and a different screw type and difficulty! They are made of steel and you will receive them in a practical case for your toolbox. SpeedOut Damaged Screw Cutter Set a tool that should not be missing from any toolbox

In stock

Car clips

Car Clips HONDA, ACURA NO1394

Toolsonline shop

1-JW1394

€0.33

Car Clips for HONDA and ACURA No 1394 POM BLACK .Cowl and trim panel retainer head diameter top:19.7 mm net length H: 15.4mm overall length: 17.4mm clip thickness B: 5.78 mm or 6 mm hole OEM HONDA :91501-SEA-003 OEM ACURA :91501-SEA-003 CIVIK 2006-ON CRV 2007-2008 RDX 2007-2008

In Stock

Εύκαμπτοι σωλήνες

Compressed air 20 bar polyurethane for pneumatic tools 8mm

ΑLFAGOMMA

205-W-195AT-8MM

€1.91

Compressed air 20 bar polyurethane for pneumatic tools 8mm internal diameter 8ΜΜ - 5/16" outer diameter 12ΜΜ wall 2ΜΜ WP 20 BAR WP 300PSI TEMPERATURE -20 βαθμους κελσίου εως 60 βαθμούς κελσίου ακτίνα κάμψης 32ΜΜ WEIGHT kg/m 0.08

In Stock

Oil change tools,oil filter tools

Three-legged two way oil filter spiral wrench 63mm-102mm

HARDEN TOOLS

1101-670911

€8.80

Τhese specialised two way oil filter wrences make removing old oil filters from cars or motorcycles a breeze.Can be used on both right and left handed oil filter threads and features the ability to be used with 1/2 ratchet. professional oil filter wrench suitable for 1/2' square drive capacity 63 mm - 100 mm made with quality carbon steel strong grasping...

Out-of-Stock

special tools for auto and moto.

1/4" Lock torque wrench 6-30Nm

Force tools

53-6472295 FORCE

€69.00

6472295 - 1/4" Lock torque wrench 6-30Nm Available units: Nm and lb/ft Delivered in a plastic carrying case Working range: 6-30 Nm (5-22 lb/ft) Tool length: 295mm Socket size: 1/4"

View

In Stock

Tools for cars engine valve

Double Cup Valve Grinders 2pc

Force tools

84-902G7 FORCE

€7.70

For hand lapping valves and valve seats. 4 different size suction cups 5/8", 13/16", 1-1/8", 1-3/8 (16-20mm & 28-35mm.) Synthetic rubber cups are resistant to chemical agents. Non-slip cups are groove locked to handle. Hardwood handles.

Angled flat band hose clamp pliers

9G0201 Long Reach Hose Clamp Pliers

FLAT BAND HOSE CLAMP PLIERS

CLIC-R COLLAR HOSE PLIERS FORCE 9G0104

Hose pinching pliers set 3pc

Χρειάζεσαι βοήθεια

Χρειάζεσαι βοήθεια;

Eίμαστε πάντα δίπλα σου
για να σου λύσουμε
οποιαδήποτε απορία.
Επικοινώνησε μαζί μας

9G0201 Long Reach Hose Clamp Pliers

FLAT BAND HOSE CLAMP PLIERS

CLIC-R COLLAR HOSE PLIERS FORCE 9G0104

Hose pinching pliers set 3pc

Customers who bought this product also bought:

Hose clip,mini,for water,fuel,air,12 mm -13 mm

1/2" 600 mm swivel head breaker bar

5pc fill/drain plug key set

Piston ring compressor 53-125

M 4 X 0.7 HSS hand tap set

C.V. joint banding tool (with cutter)

Funnel with flex extension ,2-in-1

timing tool kit for Opel,Suzuki,Fiat,diesel engine

6pcs pin punch set

Autosol metal polish

16 other products in the same category:

Bit set ,40 pc torx,hex,spline

Μ10X100 HSS HAND TAP VOLKEL

BRAKE/ENGINE CYLINDER HONE 19 mm - 63.5 mm

timing locking tools for Ford focus/cmax

Vice tools 50mm Tolsen

Engine cylinder hone 50MM-178MM

Impact driver set 14 pc, harden tools 550641

BRAKE/ENGINE CYLINDER HONE 32ΜΜ-89ΜΜ(11/4"-31/2")

safety glasses UNIVET

Thread-locking ,Saratoga-frena filetti -327

Speedout set

Car Clips HONDA, ACURA NO1394

Compressed air 20 bar polyurethane for pneumatic tools 8mm

Three-legged two way oil filter spiral wrench 63mm-102mm

1/4" Lock torque wrench 6-30Nm

Double Cup Valve Grinders 2pc

Angled flat band hose clamp pliers

Χρειάζεσαι βοήθεια

Χρειάζεσαι βοήθεια;

Eίμαστε πάντα δίπλα σου για να σου λύσουμε οποιαδήποτε απορία.Επικοινώνησε μαζί μας

Customers who bought this product also bought:

16 other products in the same category:

Eίμαστε πάντα δίπλα σου
για να σου λύσουμε
οποιαδήποτε απορία.
Επικοινώνησε μαζί μας