hand tap and die

Κολαούζα

Φυλιέρες

Επισκευαστικά σπειρωμάτων

Showing 1-24 of 74 item(s)

In Stock

HAND TAP CAS

1/2 x 14 GAS HSS hand tap set

627-12

€12.00

1/2 x 14 GAS HSS hand tap set, is the right tool to create a thread, ride on an inner surface easily and quickly. to make the thread 1/2 X 14 GAS we need to drill a 19.1 mm drill length total 80 mm ,length 35 mm set of 2 pieces, in a plastic case the collazo can be used with the collage jelly or the collage rat.

In Stock

Μανέλες κολαούζων

Tap handle m1 - m12 or w 1/16" - w 1/2 "

700-12

€2.30

Tap handle m1 - m12 or w 1/16" - w 1/2 ",for use with taps and screw extractors etc

In Stock

Επισκευαστικό σπειρωμάτων σετ

V coil ,helicoil M 8 x 1.00 thread repair kit

799-04013

€36.50

V COIL ,helicoil M 8 x 1.0 thread repair kit Complete M 8 x 1.0 Vcoil Thread Repair Kit fits Helicoil. Easily and quickly repairs damaged threads - The set is complete including the required V-Coil and Mounting Tool and drill made of high speed steel, V-Coil inserts made of stainless steel aerospace specification Due to narrow and accurate tolerances ,...

In Stock

Workshop equipment

V-Coil 6mm x 1.0 Thread Repair Kit

24-4010

€29.60

Complete thread repair kit - Including the required drill V-Coil tap and drill made from High Speed Steel V-Coil wire thread inserts manufactured from aerospace specification stainless steel Due to the narrow and accurate tolerances, the newly repaired thread is usually stronger than the original thread

In Stock

Μηχανουργικα

V-Coil 14 mm Helical Wire Thread Repair Kit for M14x1.25 Spark Plug

26-vcoil 4096

€53.80

Spark Plug M14x1.25 Repair Kit using a Special Pilot nose Tap that allows the damaged thread to be removed and a new thread to be made without the need for drilling..see below for full details. Kit consists of Special Tap, insertion tool and inserts 5 off 8.40 mm long, 5 off 12.40 mm long and 5 off 16.40 long. All tools are supplied in the container shown...

In Stock

Ανταλακτικά σπειρωμάτων

M 10 X 100 , 1.5 D , wire tread insert

916-10-100

€0.40

M 10 X 100, D 1.5 threads for thread repair with VCOIL, HELICOIL, etc. Suitable for repairing, repairing, reinforcing a damaged, worn thread with easy and quick thread. M 10 X100, D 1.5 for drilling hole 10.3, replacement height (closed) 10 mm To create stable internal threads that are resistant to temperature and corrosion. thread reinforcement in low...

In Stock

hand tap metric

Μ 5Χ0.8 HSS hand tap set

621-Μ5

€3.80

M 5X 0.8 HSS hand tap set, is the right tool to create a thread, ride on an inner surface easily and quickly. to make the thread M 5 X 0.8 we need to drill a 4.2 mm drill length total 50 mm ,length 20 mm set of 3 pieces, in a plastic case the collazo can be used with the collage jelly or the collage rat.

In Stock

Ανταλακτικά σπειρωμάτων

M 10 X 125 , 1.5 D , wire tread insert

909-10-125

€0.40

M 10 X 125, D 1.5 threads for thread repair with VCOIL, HELICOIL, etc. Suitable for repairing, repairing, reinforcing a damaged, worn thread with easy and quick thread. M 10 X125, D 1.5 for drilling hole 10.3, replacement height (closed) 8 mm To create stable internal threads that are resistant to temperature and corrosion. thread reinforcement in low...

In Stock

Μανέλες κολαούζων

Adjustable T-bar handle ratchet long tap whrench,m5,m6,m7,m8,m9,m10, m12

893-5-12

€17.94

Reversible ratchet tap holder wrench handle adjustable T - Handle long tapping threading tool set fit for m5, m6, m7, m8, m9, m10 , m 12

In Stock

Μανέλες κολαούζων

Adjustable T-bar handle ratchet tap whrench, m 5 , m6 ,m7 , m8 ,m9 ,m10 ,m11 ,m12

440-5-12

€11.00

Reversible ratchet tap holder wrench handle adjustable T - Handle tapping threading tool set fit for m5 ,m6 , m7 ,m8 ,m9 ,m10, m11 ,m12 .

In Stock

Die metric

Dies m 10 x 1.25 , HSS

835-10-125

€8.00

Dies m 10 x 1.25 HSS , ideal for repairs to cars, machinery or wherever you need to clean or create a thread.

In Stock

Κολαούζα ειδικά σπειρώματα

M 8 X 100 HSS hand tap set

838-8-100

€6.50

M 8 X 1.00 HSS hand tap set, is the right tool to create a thread, ride on an inner surface easily and quickly. to make the thread M 8 X 1.00 we need to drill a 7 mm drill length total 55 mm ,length 25 mm set of 2 pieces, in a plastic case the collazo can be used with the collage jelly or the collage rat.

In Stock

special tools for auto and moto.

V-Coil 8mm x 125 Thread Repair Kit

259-8-125

€36.50

V-Coil 8mm x 125 Thread Repair Kit Complete thread repair kit - Including the required drill V-Coil tap and drill made from High Speed Steel V-Coil wire thread inserts manufactured from aerospace specification stainless steel Due to the narrow and accurate tolerances, the newly repaired thread is usually stronger than the original thread

In Stock

Φυλιέρες

8 pc HSS fixed die and holder set M3,M4,M5,M6,M8,M10,M12

651-8

€29.00

This is a set of 8 HSS Thread - cutting die sets this set includes one each of the following sizes - M3,M4,M5,M6,M8,M10,M12 and one die holder they all come in nice metal case to hold them in.This is a hooby set

In Stock

Ανταλακτικά σπειρωμάτων

M6 X 100 1,5 D wire tread insert

358-M6-D15

€0.24

M6 X 100 1,5 D wire tread insert

In Stock

Machine taps for stainless steel

M 10 X 150 mm Machine taps for stainless steel

786-10-35246

€20.83

M 10 X 1.5 mm Machine taps for stainless steel,the inox tap range is spesial designed for coping with the demands of stainless steel resulting in reduced felction ,lower torgue and the most reliable performance m 10 x 1.50 length L1 100 mm cutting part length L2 24 mm D 10 mm DIN 371 HSS-E 35246

In Stock

Die metric

Dies m 10 x 1.0 , HSS

820-10-100

€8.00

Dies m 10 x 1.0 HSS , ideal for repairs to cars, machinery or wherever you need to clean or create a thread.

In Stock

Κολαούζα ειδικά σπειρώματα

M 14 X 100 HSS hand tap set

819-14-100

€9.50

M 14 X 1.00 HSS hand tap set, is the right tool to create a thread, ride on an inner surface easily and quickly. to make the thread M 14 X 1.00 we need to drill a 12 mm drill length total 65 mm ,length 25 mm set of 2 pieces, in a plastic case the collazo can be used with the collage jelly or the collage rat.

In Stock

Κολαούζα ειδικά σπειρώματα

M 14 X 125 HSS hand tap set

814-14-125

€9.50

M 14 X 1.25 HSS hand tap set, is the right tool to create a thread, ride on an inner surface easily and quickly. to make the thread M 14 X 1.25 we need to drill a 12.75 mm drill length total 80 mm ,length 40 mm set of 2 pieces, in a plastic case the collazo can be used with the collage jelly or the collage rat.

In Stock

Κολαούζα ειδικά σπειρώματα

M 16 X 150 HSS hand tap set

602-16150

€9.80

M 16 X 1.50 HSS hand tap set, is the right tool to create a thread, ride on an inner surface easily and quickly. to make the thread M 16 X 1.50 we need to drill a 14.5 mm drill length total 80 mm ,length 40 mm set of 2 pieces, in a plastic case the collazo can be used with the collage jelly or the collage rat.

In Stock

hand tap metric

Μ 12 X 1.75 HSS hand tap set

720-12

€8.20

Μ 12 X 1.75 HSS hand tap set, is the right tool to create a thread, ride on an inner surface easily and quickly. to make the thread M 12 X 1.75 we need to drill a 10.3 mm drill length total 75 mm ,length 30 mm set of 3 pieces, in a plastic case the collazo can be used with the collage jelly or the collage rat.

hand tap metric

Μ 10 X 1.50 HSS hand tap set

639-10

€6.00

Μ 10 X 1.50 HSS hand tap set, is the right tool to create a thread, ride on an inner surface easily and quickly. to make the thread M 10 X 1.50 we need to drill a 8.5 mm drill length total 50 mm ,length 20 mm set of 3 pieces, in a plastic case the collazo can be used with the collage jelly or the collage rat.

In Stock

hand tap metric

Μ 3 X 0.5 HSS hand tap set

638-3

€3.50

Μ 3 X 0.5 HSS hand tap set, is the right tool to create a thread, ride on an inner surface easily and quickly. to make the thread M 3 X 0.8 we need to drill a 2.5 mm drill length total 50 mm ,length 20 mm set of 3 pieces, in a plastic case the collazo can be used with the collage jelly or the collage rat.

In Stock

hand tap metric

M 4 X 0.7 HSS hand tap set

626-4

€3.70

M 4 X 0.7 HSS hand tap set, is the right tool to create a thread, ride on an inner surface easily and quickly. to make the thread M 4X 0.7 we need to drill a 3.3 mm drill length total mm ,length mm set of three pieces, in a plastic case the hand tap set can be used with the collage jelly or the collage rat.