special tools for auto and moto.

Active filters

2
Available
Measuring instruments

Telescoping T bore gauge 6pcs set ,8mm-150mm,...

233-6
€19.30
Telescoping gages are used for determining the true size of holes ,slots,and recesses up to 5/16"-6",8mm-150mm.The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.The final hole size is obtained by meazuring over the gage contacts with micrometer or calipers. 6 pieces range 8mm...
2
Available
Oil change tools,oil filter tools

Cup type oil filter 76mm,14 flutes

311-61917-7614
€5.00
76mm oil filter wrench with 14 flutes is suitable for use on eco filters on AUDI,BMW,MERCEDES-BENZ,PORCE,VOLKSWAGEN etc.  
Available
special tools for auto and moto.

1/4" Lock torque wrench 6-30Nm

53-6472295 FORCE
€46.80
6472295 - 1/4" Lock torque wrench 6-30Nm Available units: Nm and lb/ft Delivered in a plastic carrying case Working range: 6-30 Nm (5-22 lb/ft) Tool length: 295mm Socket size: 1/4"
2
Available
Tools for cars engine valve

overhead valve spring compressor

107-62109
€32.20
For use on a wide range of OHV, OHC and CVH engines but not suitable for use on engines with deep seated valves. Allows valve springs and valve stem oil seals to be replaced with the cylinder head. Features a reversible Jaw-adaptor and an automatic cam-action locking to a pre-determind setting.
Available
special tools for auto and moto.

Hose pinching pliers set 3pc

253-903G12
€11.80
3pcs Flexible Nylon Hose Clamp Mixed Sizes Filling Hose Tool Kit Pinching Off Pliers For clamping flexible hoses. Made of heat-resistant reinforced nylon, each includes a locking mechanism. One small clamp for 1/8 "to 5/16" diameter. One medium clamp for 1/2 "to 3/4" diameter. One larger size clamp for 3/4 "to 1" diameter.
2
Available
Εργαλεία καυσίμων

Fuel line pliers for VW,AUDI,OPEL,TOYOTA,MERCEDES

99-9G0716
€24.00
Fuel line pliers quick and easy fuel connector removal and replacement. For use on fuel filter connectors during replacement. prevents fuel leakage from damaged fuel connectors. Applications:Audi,VW,GM Mercedes including M-class,Toyota,FIAT ,OPEL. Rrmoval of connector:pull the connector backwards with the pliers. replacing of connector:slide the connector...
2
Available
Workshop equipment

Clip Removal Pliers For Door Inner-Linings

61-9Μ0101 FORCE
€12.80
Clip removal pliers,for removai of door inner-linings and other trim items held in place by plastic rivets.Spring-loaded pliers for quick removing staples, clips, door panels, fascia and trim supports without damage. Wide nose design to prevent breaking or tearing panels when undoing facings. Easy access into confined areas, such as bumper covers. Cushion...
2
Available
Oil change tools,oil filter tools

Oil service wrench,8mm &10mm .FORCE No. 9U0706

278-9U0706
€6.50
Oil service wrench,8mm &10mm .FORCE No. 9U0706.Chrome -vanadium,chrome-plated,with 8mm and 10mm outside square drive for various cars,RENAULT,PEUGEOT,CITROEN ,SAAB,VOLVO,HONDA,MAZDA e.t.c
2
Available
Measuring instruments

Screw pitch gauge

146-30145003
€6.50
A tread gauge also known as a screw pitch gauge or pitch gauge,is used to measure the pitch or lead of a screw thread.The uppermost gauge in the image is an ISO metric and whitworth screws pitch gauge. ISO METRIC 0,4 -0,5-0.6-0,7-0,75-0.8-0.9-1-1.25-1.5-1.75-2-2.5-3.0-3.5-4.0-5.0-5.5-6.5-7  WHITWORTH...
2
Available
Εργαλεία καυσίμων

Fuel Tank Sender Wrench 3 Leg 75 - 160mm

f102
€18.70
This 3 leg Fuel Tank Sender Wrench is designed for the removal of the retaining ring on the fuel tank sender units. The size ranges from 75mm to 160mm which will cover many makes and models Additional Information 3 Leg The size ranges from 75mm to 160mm Designed for removal of the retaining ring on the fuel tank sender units Suitable for many modern makes...
2
Available
special tools for auto and moto.

Car light tester 6-24 V

287-88423
€4.90
Car light tester 6-24 V checks 6-24 volts system solid brass body with a test light prod tip is covered with a brass protective screw cap 850 mm cable with an alligator clip on the end
2
Available
Industrial Supplies

Bearing puller kit

133-66618
€40.40
For the removal of shaft mounted ball bearings within a housing, self locking hooks lock onto the ball bearing. The self locking arrangement means that the force applied is 100% utilised to give a straight pulling force at all times. Puller yoke with centre screw and twin arms. 2 x Threaded leg extensions 30 and 95 mm. 6 x Ball ended threaded puller...
2
Available
special tools for auto and moto.

Bit set ,40 pc torx,hex,spline

135-4401
€28.50
Bit set 40 pc content: Hex bit 4-5-6-7-8-10-12mm (30mm) Hex bit 4-5-6-7-8-10-12mm (75mm) Star bit T20-T25-T30-T40-T45-T50-T55 (30mm) Star bit T20-T25-T30-T40-T45-T50-T55 (75mm) Spline bit M5-M6-M8-M10-M12 (30mm) Spline bit M5-M6-M8-M10-M12 (75mm) Bit holder 3/8" x 10mm Bit holder 1/2" x 10mm
Available
Industrial Supplies

Nut riveter tool kit

25-mox
€44.00
The rivet nut  tool has unlimited uses. The rivet nut tools design enables the rivet nuts to be seated tighter than with conventional tools. This rivet nut fastening tool has unlimited uses.The rivet nut possesses far greater load bearing capability than a regular sheet metal screw.  Use our rivet nut tools instead of a sheet metal screw. The rivet nut...
2
Available
Εργαλεία καυσίμων

Adjustable fuel tank lid remover

105-9G0713
€32.00
Adjustable fuel tank lid remover Universal adjustable tool for application on most cars as BMW, Mercedes Benz and VAG. Jaw adjustable range: 122-199 mm Suitable for different fuel tank lids as on BMW, Mercedes Benz and VAG (Audi, VW) Use with 3/8" Wrench. spesial jaws designed to remove and install the tank closely.
2
Available
Motorcycle tools

Motorcycle flywheel drive puller set 10pcs

274-H0-7013
€64.00
Motorcycle flywheel drive puller set 10pcs, application:  HONDA ,SUZUKI,YAMAHA,KYMCO,DUCATi,CAGIVA,BOSCH,GILERA,SAM,DUCAN, SFERA,MBK,PEUGEOT,KIMOO,MOTOPLATT,KAWASAKI,KOKUSAN,MINARELI Thread sizes: M14X1.5 right Μ16Χ1.5 right Μ18Χ1.5 right Μ19Χ1.0 right Μ20Χ1.0 right Μ22Χ1.0 right Μ22Χ1.5 right Μ24Χ1.0 right Μ25Χ1.5 right Μ26Χ1.0 right Μ26Χ1.5 right...
2
Available
special tools for auto and moto.

universal clutch aligning tool

65-903T6
€12.50
Universal clutch alignment tool. For easy alignment and installation on the workbench. Suitable for most vehicles under 5 tons with a single plate clutch.
2
Available
Tools for cars engine valve

Double Cup Valve Grinders 2pc

84-902G7 FORCE
€5.80
For hand lapping valves and valve seats. 4 different size suction cups 5/8", 13/16", 1-1/8", 1-3/8 (16-20mm & 28-35mm.) Synthetic rubber cups are resistant to chemical agents. Non-slip cups are groove locked to handle. Hardwood handles.
2
Available
Tools for cars engine valve

20 blades feeler gauge metric set 0.05mm-1.00mm

180-20
€5.20
20 blade metric feeler gauge set 0.05mm-1.00 mm precision measure tool high guality 20pcs metric 0.05mm-1.00mm feeler gauge measuring tools high accurary,good elasticity,high strenth,high rust resistance suitable for machinery and equipment manufacturing automotive air conditioning compressor manufacturing....
2
Available
Μηχανουργικα

External and internal restorer thread file metric

151-9U1101
€19.80
 External & Internal Restorer Thread File Metric These top quality thread restoring files are designed for renewing damaged threads on bolt, stud, axle or shafts of any diameter. Suitable for both left and right hand threads. A must for any mechanical or engineering application. Designed for use in hidden & narrow areas be it internal or external...
2
Available
special tools for auto and moto.

Metric Dial Indicator

46-HGM 60
€13.50
High precision 60mm dial indicator Rotating bezel with lock for zero setting Range 0 - 10mm, graduation 0.01mm
Showing 1-24 of 110 item(s)
special tools for auto and moto.

Filter By

Brand

Brand

Price

Price

  • €2.00 - €112.00

Product added to wishlist
Product added to compare.

To better serve our users we use Cookies. By choosing to continue consented to using Cookies.