Μηχανουργικα

Active filters

Φιλτράρισμα κατά

Μάρκα

Μάρκα

 2
  • New
Available
Μανέλα τόρνου iso 6 αριστερή

Carbide brazed lathe turning cutting tool ISO...

512-16-16
€7.20
Carbide brazed lathe turning cutting tool ISO 6,DIN4980 ,Left, 16 MM X 16 MM Η               :16 mm b               :16 mm L(length) :110mm n               :6mm r                :0,5 Weight      :0.210 kg
 2
Available
special tools for auto and moto.

Metric Dial Indicator

46-HGM 60
€13.50
High precision 60mm dial indicator Rotating bezel with lock for zero setting Range 0 - 10mm, graduation 0.01mm
 2
Available
Measuring instruments

Telescoping T bore gauge 6pcs set ,8mm-150mm,...

233-6
€19.30
Telescoping gages are used for determining the true size of holes ,slots,and recesses up to 5/16"-6",8mm-150mm.The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.The final hole size is obtained by meazuring over the gage contacts with micrometer or calipers. 6 pieces range 8mm...
 2
Available
Μέγγενες ,σεπόρτια,μέγγενες δραπάνου

2-way cross slide vise ,support

85-f105
€76.00
Keep your drill press in the desired position with this four-cross drill press vise. This two-way clamping machine features a three-inch jaw width and opening. It also features a one-inch jaw depth for attaining a tight grasp. The cast iron construction is made for rugged applications. The steel jaws are serrated, and the screws are made from cold-rolled...
 2
Available
Ηλεκτροκολλήσεις

multi angle magnetic welding clamp

121-102-156-18
€10.70
The Magnetic Welding Clamp is a great tool for welders. One of the biggest difficulty that welders face is positioning the items that need to be welded. That is where the Magnetic Welding Clamps come in use. The Magnetic Welding Clamps ensure that the items that require welding remain in position, greatly easing and improving the welding job. Multi Angle...
 2
Available
Μανέλα τόρνου iso 6 αριστερή

Carbide brazed lathe turning cutting tool ISO...

505-ISO61212
€5.95
Carbide brazed lathe turning cutting tool ISO 6,DIN4980 ,Left, 12 MM X 12 MM Η               :12 mm b               :12 mm L(length) :110mm n               :5mm r                :0,4 Weight      :0.110 kg
 2
Available
Τσοκ δραπάνων-τορνου

Drill chuck arbors MT2 - B16

392-ΜΤ2-Β16
€3.50
Drill  chuck arbors MT2 - B16 is used to adjust the chuck mainly to a vertical drill in the lathe and the milling machine. The drill chuck arbors MT2 -B16 serve to change the conicity of the drill - chuck MT2 - B16 Total length: 110 mm final diameter (the part inserted into the chuck cone): 15 mm - 16 mm rear part (the part that comes in the drill,...
 2
Available
Κολες-χημικα-λιπαντικα.

Cutting paste

134-h100
€9.50
PRODUCT DETAILS: The paste sticks to the tool No dripping or splashing  Ideal for working under difficult circumstances e.g. "Overhead use" and for machines without cooling device. USAGE:Application: Increases tool life and surface finish significantly when: SAWING, MILLING, TAPPING, GRINDING, DRILLING. For machining all kind of steels. Also excellent for...
 2
Available
Industrial Supplies

Letter punch set 27 pcs, 6mm

128-25104
€12.00
Letter punch set 27 pcs,6mm. Steel Punch Stamp Die Set Metal Tool Letters (A-Z) 27-Piece Set 6mm The steel punch stamp die set metal tool makes it possible for you to emboss names, words or numbers on most metal, plastic or wooden surfaces. Punches are made of hardened carbon steel. These durable punches stand up to heavy use without a problem. They make...
 2
Available
Κολες-χημικα-λιπαντικα.

Grinding paste-chemico

129-105
€4.20
Grinding paste-chemico,coarse and fine. Grinding Paste is a fine grade paste used for the finishing work in grinding applications. It is specially formulated for use when valve grinding. Water Mixable Hand or Machine Grinding Effective removing surface defects & carbon deposits Applications Specially formulated for valve and seat grinding...
Available
Αξεσουάρ ηλεκτρικών εργαλείων

13mm Sanou Keyed Drill Chuck 1/2" 20UNF for...

33- 1/2 1-13
€3.50
1.5~13mm Sanou Keyed Drill Chuck 1/2"-20UNF for Electric Drills with 1 Chuck Key Heavy-Duty keyed chuck for both Hand and Impact drills. 1/2"-20 UNF female thread Capacity 1.5~13mm Metal chuck key x 1 piece
 2
Available
Tools for cars engine valve

20 blades feeler gauge metric set 0.05mm-1.00mm

180-20
€5.20
20 blade metric feeler gauge set 0.05mm-1.00 mm precision measure tool high guality 20pcs metric 0.05mm-1.00mm feeler gauge measuring tools high accurary,good elasticity,high strenth,high rust resistance suitable for machinery and equipment manufacturing automotive air conditioning compressor manufacturing....
 2
Available
Κονδύλια πολύφτερα -τετράφτερα με τρύπα

12 mm end mill HSSE 8% CO

495-12
€11.80
12 mm -END MILL HSSE 8% co DIN844N NZ NON-CENTER-CUT
 2
Available
Κολες-χημικα-λιπαντικα.

Autosol metal polish

169-1000
€3.90
Autosol is a metal polish that no garage or workshop should be without. The paste is effective on all metals but it is especially effective on chrome, brass, bronze, copper and stainless steel. It is also suitable for use in marine and household applications where metal is common even in the kitchen sink! How easy is it to apply? It's simple to apply,...
 2
Available
Μηχανουργικα

External and internal restorer thread file metric

151-9U1101
€19.80
 External & Internal Restorer Thread File Metric These top quality thread restoring files are designed for renewing damaged threads on bolt, stud, axle or shafts of any diameter. Suitable for both left and right hand threads. A must for any mechanical or engineering application. Designed for use in hidden & narrow areas be it internal or external...
 2
Available
Μέγγενες ,σεπόρτια,μέγγενες δραπάνου

Two -way cross slide vise 100ΜΜ-4"

122-F201
€93.00
Keep your drill press in the desired position with this four-cross drill press vise. This two-way clamping machine features a three-inch jaw width and opening. It also features a one-inch jaw depth for attaining a tight grasp. The cast iron construction is made for rugged applications. The steel jaws are serrated, and the screws are made from cold-rolled...
 2
Available
Industrial Supplies

9PCS FIGURE PUNCH 6MM

127-25097
€5.80
9PCS FIGURE PUNCH. Carbon steel, hardened• Surface sandblasting• Packing: color box
Available
Μηχανουργικα

9PCS FIGURE PUNCH 3ΜΜ

43-25094 tolsen
€3.50
9PCS FIGURE PUNCH. Carbon steel, hardened• Surface sandblasting• Packing: color box
Available
special tools for auto and moto.

1/4" Lock torque wrench 6-30Nm

53-6472295 FORCE
€46.80
6472295 - 1/4" Lock torque wrench 6-30Nm Available units: Nm and lb/ft Delivered in a plastic carrying case Working range: 6-30 Nm (5-22 lb/ft) Tool length: 295mm Socket size: 1/4"
Showing 1-24 of 160 item(s)
Product added to wishlist
Product added to compare.

To better serve our users we use Cookies. By choosing to continue consented to using Cookies.