Workshop equipment

Active filters

 2
Available
Workshop equipment

Clip Removal Pliers For Door Inner-Linings

61-9Μ0101 FORCE
€12.80
Clip removal pliers,for removai of door inner-linings and other trim items held in place by plastic rivets.Spring-loaded pliers for quick removing staples, clips, door panels, fascia and trim supports without damage. Wide nose design to prevent breaking or tearing panels when undoing facings. Easy access into confined areas, such as bumper covers. Cushion...
 2
Available
Car clips

Clip's for HYUNDAI,KIA

331-1315
€0.35
Clip's for car's,moto e.t.c head diameter top: 12.8mm x11.1mm middle diameter width, wider bottom A: 20 mm x 12.1mm net length H:10.6 mm overall length: 14.7mm clip thickness B:14.3 mm x 9.3 mm collor :red for :hyundai-kia With sealer O.E.M :87756-C5000,87756-3E500
 2
Available
Κολες-χημικα-λιπαντικα.

Cut and drill oil,spray.

427-1
€5.50
Metal cutting and drilling spray, suitable for every drilling, threading, makes it easier for you to drill and protects our drill, tap, splinter, etc. from wear and tear. For cutting and drilling of metals, ferrous and non-ferrous metals such as steel, iron, aluminum, brass, etc. lubricates, cools and creates an anti-dusting protection film for cutting...
 2
Available
Oil change tools,oil filter tools

Oil service wrench,8mm &10mm .FORCE No. 9U0706

278-9U0706
€6.50
Oil service wrench,8mm &10mm .FORCE No. 9U0706.Chrome -vanadium,chrome-plated,with 8mm and 10mm outside square drive for various cars,RENAULT,PEUGEOT,CITROEN ,SAAB,VOLVO,HONDA,MAZDA e.t.c
 2
Available
Measuring instruments

Screw pitch gauge

146-30145003
€6.50
A tread gauge also known as a screw pitch gauge or pitch gauge,is used to measure the pitch or lead of a screw thread.The uppermost gauge in the image is an ISO metric and whitworth screws pitch gauge. ISO METRIC 0,4 -0,5-0.6-0,7-0,75-0.8-0.9-1-1.25-1.5-1.75-2-2.5-3.0-3.5-4.0-5.0-5.5-6.5-7  WHITWORTH...
Available
Workshop equipment

46PC 1/4 SOCKET SET FORCE

17-2462
€32.50
46PC 1/4 SOCKET SET FORCE Pins: 4-4,5-5-5,5-6-7-8-9-10-11-12-13-14mm Allen Nose Knuckle: 3-4-5-6-7-8 x 32mm Torx tip nuts: T8-T10-T15-T20-T25-T27-T30-T40 x 32mm Nose claws straight: 4-5,5-7 x 32mm Cross nose cords: PH1-PH2-PH3 x 32mm Pozidrive nose cords: PZ1-PZ2-PZ3 x 32mm Chestnut Extension: 50mm Extension: 100mm A broken cross T-shirt Screwdriver for...
 2
Available
Εργαλεία καυσίμων

Fuel Tank Sender Wrench 3 Leg 75 - 160mm

f102
€18.70
This 3 leg Fuel Tank Sender Wrench is designed for the removal of the retaining ring on the fuel tank sender units. The size ranges from 75mm to 160mm which will cover many makes and models Additional Information 3 Leg The size ranges from 75mm to 160mm Designed for removal of the retaining ring on the fuel tank sender units Suitable for many modern makes...
 2
Available
special tools for auto and moto.

Car light tester 6-24 V

287-88423
€4.90
Car light tester 6-24 V checks 6-24 volts system solid brass body with a test light prod tip is covered with a brass protective screw cap 850 mm cable with an alligator clip on the end
 2
Available
Working gloves

professional disposable gloves

114-506
€14.20
50 nitrile thickened gloves Professional disposable gloves hypoallergenic They do not contain latex With powdered vegetables against sweat Enhanced edge ambidextrous Long fruit 506.10 size "M" 506.11 size "L" Size 506.12 "XL
 2
Available
Industrial Supplies

Bearing puller kit

133-66618
€40.40
For the removal of shaft mounted ball bearings within a housing, self locking hooks lock onto the ball bearing. The self locking arrangement means that the force applied is 100% utilised to give a straight pulling force at all times. Puller yoke with centre screw and twin arms. 2 x Threaded leg extensions 30 and 95 mm. 6 x Ball ended threaded puller...
 2
Available
Φυλιέρες

8 pc HSS fixed die and holder set...

651-8
€29.00
This is a set of 8 HSS Thread - cutting die sets this set includes one each of the following sizes -  M3,M4,M5,M6,M8,M10,M12 and one die holder they all come in nice metal case to hold them in.This is a hooby set
 2
Available
special tools for auto and moto.

Bit set ,40 pc torx,hex,spline

135-4401
€28.50
Bit set 40 pc content: Hex bit 4-5-6-7-8-10-12mm (30mm) Hex bit 4-5-6-7-8-10-12mm (75mm) Star bit T20-T25-T30-T40-T45-T50-T55 (30mm) Star bit T20-T25-T30-T40-T45-T50-T55 (75mm) Spline bit M5-M6-M8-M10-M12 (30mm) Spline bit M5-M6-M8-M10-M12 (75mm) Bit holder 3/8" x 10mm Bit holder 1/2" x 10mm
Available
Industrial Supplies

Nut riveter tool kit

25-mox
€44.00
The rivet nut  tool has unlimited uses. The rivet nut tools design enables the rivet nuts to be seated tighter than with conventional tools. This rivet nut fastening tool has unlimited uses.The rivet nut possesses far greater load bearing capability than a regular sheet metal screw.  Use our rivet nut tools instead of a sheet metal screw. The rivet nut...
 2
Available
Πριτσιναδόροι

Hand rivet nut kit metric m3,m4,m5,m6,m8 ,with...

452-166-7-270
€47.00
Professional nut riveret set,5pc, heavy duty tool for easy single-hand operation for a wide range of applications even in inaccessible locations. For threads M3, M4, M5, M6, M8. Handy rider ideal for drilling and embedding threaded rivets on metal surfaces. Ideal tool for use by blacksmiths, carpenters, engineers, etc. With very easy and simple...
 2
Available
Εργαλεία καυσίμων

Adjustable fuel tank lid remover

105-9G0713
€32.00
Adjustable fuel tank lid remover Universal adjustable tool for application on most cars as BMW, Mercedes Benz and VAG. Jaw adjustable range: 122-199 mm Suitable for different fuel tank lids as on BMW, Mercedes Benz and VAG (Audi, VW) Use with 3/8" Wrench. spesial jaws designed to remove and install the tank closely.
 2
Available
Motorcycle tools

Motorcycle flywheel drive puller set 10pcs

274-H0-7013
€64.00
Motorcycle flywheel drive puller set 10pcs, application:  HONDA ,SUZUKI,YAMAHA,KYMCO,DUCATi,CAGIVA,BOSCH,GILERA,SAM,DUCAN, SFERA,MBK,PEUGEOT,KIMOO,MOTOPLATT,KAWASAKI,KOKUSAN,MINARELI Thread sizes: M14X1.5 right Μ16Χ1.5 right Μ18Χ1.5 right Μ19Χ1.0 right Μ20Χ1.0 right Μ22Χ1.0 right Μ22Χ1.5 right Μ24Χ1.0 right Μ25Χ1.5 right Μ26Χ1.0 right Μ26Χ1.5 right...
 2
Out of stock
Εργαλεία μηχανικών -συνεργείων

3pc scraper knife set

528-903M1
€18.50
3pc scraper knife set.Scraper Set for cleaning and scraping flanges, adhesives, dry oils, grease etc. Stainless steel with sturdy wooden handle and knife edge for easy operation. stainless steel blade width 15 mm, 20 mm, 30 mm wooden handle, durable, long, convenient, with a hole for storage stainless steel blade, high quality.
 2
Available
Engine timing tools

Engine timing tool set for FIAT , FORD , LANCIA...

351-910G7
€70.00
Engine timing tool set for FIAT , FORD , LANCIA ,ALFA ROMEO , 1.2 8V & 1.4 16V.This kit is for locking the camshaft and crankshaft in place while you change the timing belt and perform other repair on fiat engines.This kit consists of a crankshaft locking tool a camshaft setting plate and a belt tensioner adjuster for the 1.2 engine and an additional...
Showing 1-24 of 301 item(s)
Product added to wishlist
Product added to compare.

To better serve our users we use Cookies. By choosing to continue consented to using Cookies.