Industrial Supplies

Μηχανουργικα

Κολες-χημικα-λιπαντικα.

Εύκαμπτοι σωλήνες

Στήριξη / Βίδες

Caster wheel

Hydraulic fittings

Drive belts

Εξαρτήματα μηχανημάτων - χειρολαβές

Showing 1-12 of 607 item(s)

In Stock

HAND TAP CAS

1"1/4 x 11 GAS HSS hand tap set

1179-114

€80.00

1"1/4 x 11 GAS HSS hand tap set, is the right tool to create a thread, ride on an inner surface easily and quickly. set of 2 pieces, in a plastic case the collazo can be used with the collage jelly or the collage rat.

In Stock

Εύκαμπτοι σωλήνες

Fuel oil hose 8MM

36-8

€4.60

€4.34 ανα μετρο

Tube: oil resistant synthetic rubber.Reinforcement: one high tensile textile braid.Cover: abrasion, ozone and hydrocarbon resistant synthetic rubber.Application: low pressure hydraulic lines, fuel oil, antifreeze solutions, air and water. Specially designed for use in “PUSH ON” applications.HALOGEN-FREE COMPOUNDConstant operation: -20 °C +80 °C air max T...

The Threaded Rivet Nut Set (300 pcs) includes sizes from M3 to M10

The Threaded Rivet Nut Set (300 pcs) includes sizes from M3 to M10 2

In Stock

Blind rivet nut insert

300pc Threaded Rivet Nut Set, m3 - m10

1709-A-RM300S

€15.00

The Threaded Rivet Nut Set (300 pcs) includes sizes from M3 to M10, made of high-strength carbon steel, available in silver and yellow finishes. Designed for creating reliable threads in thin sheet metal, where conventional methods cannot be applied. Packed in a practical storage box, this assortment is suitable for professionals and DIY enthusiasts ....

In Stock

Machine tap

Μ6 Χ 100 machine tap volkel

1026

€8.51

M 6 X 100 mm Machine taps for steel,the tap range is spesial designed for coping with the demands of steel resulting in reduced felction ,lower torgue and the most reliable performance m 6 x 100 length L1 80 mm cutting part length L2 19 mm D 4.9 mm DIN 371 HSS-E 37538 volkel

In Stock

Κονδύλια πολύφτερα -τετράφτερα με τρύπα

6 mm end mill HSSE 8% co

534-6

€9.80

6 mm -END MILL HSSE 8% co DIN844N NZ NON-CENTER-CUT

Metal countersink 10.4 HHS-CO ,3 flute 90°

Metal countersink 10.4 HHS-CO ,3 flute 90° 2

In Stock

φρέζες μετάλλου 90°

Metal countersink 10.4 HHS-CO ,3 flute 90°

379-10.4

€9.70

Metal countersink 10,4 HHS-CO ,3 flute 90° high speed ground deburring countersinks with three sharp 90° degree cutting edges for rabid swarf clearance hss ground with three sharp 90° degree cutting edges for rapid swarf clearance suitable for use on sheat metal ,cast iron ,aluminium,non-ferrous metals and plastic

Metal countersink 20.5 mm HSS -CO ,3 flute 90°

Metal countersink 20.5 mm HSS -CO ,3 flute 90° 2

In Stock

φρέζες μετάλλου 90°

Metal countersink 20.5 mm HSS -CO ,3 flute 90°

454-20.5

€23.50

Metal countersink 20.5 mm HHS-CO ,3 flute 90° high speed ground deburring countersinks with three sharp 90° degree cutting edges for rabid swarf clearance hss ground with three sharp 90° degree cutting edges for rapid swarf clearance suitable for use on sheat metal ,cast iron ,aluminium,non-ferrous metals and plastic Milling machine, 20,5 mm for M 10...

Hose clip, mini, for water, fuel, air, 6 mm

Hose clip, mini, for water, fuel, air, 6 mm 2

In Stock

Κολάρα στήριξης - Τσέρκια

Hose clip, mini, for water, fuel, air, 6 mm

821-6

€0.30

Hose clip, mini, for water, fuel, air, 6 mm

In Stock

Κολες-χημικα-λιπαντικα.

Cut and drill oil,spray.

427-1

€5.50

Metal cutting and drilling spray, suitable for every drilling, threading, makes it easier for you to drill and protects our drill, tap, splinter, etc. from wear and tear. For cutting and drilling of metals, ferrous and non-ferrous metals such as steel, iron, aluminum, brass, etc. lubricates, cools and creates an anti-dusting protection film for cutting...

In Stock

Κολες-χημικα-λιπαντικα.

Grinding paste-chemico

129-105

€5.70

Grinding paste-chemico,coarse and fine. Grinding Paste is a fine grade paste used for the finishing work in grinding applications. It is specially formulated for use when valve grinding. Water Mixable Hand or Machine Grinding Effective removing surface defects & carbon deposits Applications Specially formulated for valve and seat grinding...

Three-legged two way oil filter spiral wrench 65 mm - 120...

Three-legged two way oil filter spiral wrench 65 mm - 120... 2

In Stock

Oil change tools,oil filter tools

Three-legged two way oil filter spiral wrench 65 mm - 120 mm

1326-S-OFW

€9.50

Τhese specialised two way oil filter wrences make removing old oil filters 65 mm - 120 mm from cars or motorcycles a breeze.Can be used on both right and left handed oil filter threads and features the ability to be used with either a 21mm spanner 3/8 ratchet or 1/2 ratchet.

In Stock

Εξαρτήματα Εργαλείων

Self -tighten drill chuck 1-16mm B18

323-B18

€36.50

Self -tighten drill chuck 1-16mm B18

Product added to wishlist

Product added to compare.

To better serve our users we use Cookies. By choosing to continue consented to using Cookies.